Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Palm Springs
Door installation in Palm Springs typically runs $1,800 to $7,500 depending on the door type, the condition of your concrete block opening, and whether you need impact-rated glazing for Palm Beach County code compliance. Most entry door replacements we handle in the village take one day, though homes with corroded original frames and moisture-damaged block may need an extra day for masonry patching before the new door is anchored. If you live in Palm Springs between Congress Avenue and Military Trail, you already know the housing stock here wasn’t built for salt air and 150 mph wind events. We’re TruePane Windows & Doors, and we’ve been rebuilding door openings in these CBS tract homes long enough to know exactly what fails and what doesn’t. Call (786) 829-6722 for a free estimate from someone who actually measures twice and quotes on paper.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Door Installation Company
TruePane was founded in 2008 by second-generation glazier Dale Kessler, but the craft commitment behind it runs many years deep. Palm Springs homeowners call us because we treat a door opening as a structural assembly, not a swap. That means checking the concrete block around the jamb for spalling, verifying the slab slope at the threshold, and quoting the right anchoring hardware for masonry, not wood framing. Customers around Lakewood Road and Davis Road have told us the difference is obvious when the crew shows up uniformed, background-checked, and ready to explain why a stainless steel anchor matters more than an extra bead of caulk.
We are an authorized installer for manufacturers including, and we register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s the same on every job in Palm Springs. A live person answers the phone 24 hours a day, 7 days a week. You won’t leave a voicemail and wait. When you need a door measured, quoted, and installed right the first time, we’re the last call you make.
Our Door Installation Services in Palm Springs
Palm Springs homes were built tight and simple, which means door openings are unforgiving when something is out of square. We install every exterior and interior door type common to this village, with an emphasis on impact-rated units that hold up to the high-velocity hurricane zone we live in. Our Door Installation team handles the full scope below.
Entry & Swing Doors
Entry doors in Palm Springs take a beating from afternoon sun on the west-facing fronts along 10th Avenue and the daily salt air that works its way into unsealed jambs. We install fiberglass and steel impact-rated entry doors with marine-grade hinges and stainless steel fasteners, and we rebuild the threshold on slab homes where flat yards let rain pool against the bottom sweep. Most entry replacements in Palm Springs are done in one visit.
Double & French Doors
Double door openings in 1950s and 1960s Palm Springs tract homes were often framed with aluminum tracks that have since corroded at the meeting stile. We replace those with impact-rated French doors and true double entry systems anchored into the CBS block with epoxy-set stainless anchors. The trick is getting both leaves to meet square when the original opening has shifted a quarter inch over fifty years. That’s the kind of adjustment you can’t see in a showroom photo.
Bifold & Folding Doors
Folding door systems are increasingly popular in Palm Springs for connecting living rooms to screened patios and backyard slabs, but they require a level header and solid anchoring that many original block openings don’t have without prep work. We frame reinforcement into the existing masonry, flash the sill properly for slab-level drainage, and use stainless hardware rated for coastal exposure. The result is a door that opens fully without sagging in year three.
Pivot Doors
Pivot doors are a statement piece, but in a CBS home near the coast, the pivot hardware has to be overbuilt. We specify stainless steel pivot sets and reinforced header plates so the door doesn’t bind as the block settles. Palm Springs isn’t a place for budget pivot hardware, and we won’t quote it. If the pane isn’t true, the job isn’t done. That rule applies double to a 300-pound pivot door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We install and service door systems from Marvin, Pella, and Andersen, along with impact-rated lines like ViewLux that are engineered specifically for Florida’s wind-borne debris requirements. When a Palm Springs homeowner needs a replacement part, a sagging hinge, or a full impact door, our team stocks or quickly sources what’s needed. You get side-by-side quotes on paper so you can see the frame construction, glass package, and warranty terms for each line before you spend a dollar. No mystery pricing and no substitution after the contract is signed.
Common Door Installation Problems We See in Palm Springs Homes
- Corroded original aluminum frames wicking moisture into concrete block. Decades of salt air and daily rain have rusted the frame flanges and loosened the anchors. The block around the opening often needs chipping and patching before a new impact door can be set square.
- Flooded sill tracks on slab homes with flat or near-flat yards. South Florida’s afternoon downpours pool against the threshold and wick under the door. Non-marine-grade bottom sweeps and hinges rust within a few hurricane seasons, which is why we quote stainless hardware and properly sloped sills on every Palm Springs job.
- Stucco cracks radiating from door corners. When the original aluminum frame corrodes and shifts, the stucco around the opening cracks. Installing a new door without addressing the block behind it just hides the problem until the stucco fails again.
- Inland-spec doors failing insurance inspections. A standard powder-coated door with unsealed jambs won’t survive a Palm Beach County wind mitigation review. Homeowners who buy the cheap quote often find out at renewal time that their insurance company wants impact-rated documentation they don’t have.
Pricing for Door Installation in Palm Springs, FL
In Palm Springs, a standard impact-rated entry door replacement typically runs $2,200 to $4,800 depending on size, glass package, and the condition of the existing block opening. Sliding glass door replacements in these 1950s to 1970s CBS homes run $3,500 to $7,500 when masonry patching and new stainless anchoring are included. French and double door systems fall between $4,000 and $9,000, and custom pivot doors start around $6,500 and go up from there based on hardware and glass. The coastal-spec version of any door costs 15 to 30 percent more than the inland quote, and here’s why: stainless hardware, marine-grade finishes, sealed jambs, and proper flashing on a slab don’t come in the entry-level package. Cheap spec fails within a decade and the tear-out costs more than the original coastal-spec install would have. We give you a written line-item quote before any work begins, and the price doesn’t change unless you change the scope. Call (786) 829-6722 to schedule a free estimate in the village.
We Also Serve Cities Near Palm Springs
We serve Door Installation in Palm Springs and the surrounding communities of Riviera Beach, Juno Beach, Lake Park, and North Palm Beach. If you’re just over the line but still dealing with the same salt air and slab construction, our crews work across the northern Palm Beach County corridor every week.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Palm Springs
Original aluminum door frames in Palm Springs sit five miles from the Atlantic, and the salt-laden air corrodes the metal where it meets the concrete block. That corrosion lets moisture wick into the masonry, which loosens the anchors and rots the sill track from underneath. Inland homes don’t carry that salt load or the daily slab-level rain pooling that accelerates it. By the time we’re called, the frame is often rusted to the point where the block behind it needs chipping and patching before a new impact door can be anchored properly. Call (786) 829-6722 and we’ll inspect your opening and tell you exactly what’s needed.
Yes, because Palm Beach County’s building code requires either impact-rated glazing or an approved shutter system covering the opening. Many insurers in Florida are now conditioning policy renewals on proof of impact-rated window and door upgrades, and an old shutter doesn’t always satisfy that inspection. A new impact door from a line like ViewLux meets the wind-borne debris requirement and often helps with wind mitigation credits on your premium. We register the manufacturer warranty and document the install for your insurance file.
The coastal spec includes stainless steel anchors and hinges, marine-grade powder coating on track hardware, sealed jambs, and flashing details that keep water out of a slab-level opening. That adds 15 to 30 percent to the cost of the same door spec’d for an inland home. It’s not markup. It’s the difference between a door that holds up for twenty years and one that fails inside ten, and the failure usually means a full tear-out plus masonry repair. You can buy the cheaper version once, or the right version once. We quote coastal-spec hardware on every Palm Springs job because this village sits in a high-velocity hurricane zone.
In most Palm Springs CBS homes, the original aluminum frame has corroded enough that it cannot be reused. We remove the full frame, chip out any spalled or moisture-damaged concrete around the opening, patch the block, and then set the new impact-rated door with epoxy-set stainless anchors and perimeter flashing. This is more labor than a wood-frame install, which is why quotes on these 1950s to 1970s tract homes run higher than in newer suburbs. The result is a door anchored the way it should have been from the start.
We install Marvin, Pella, and Andersen impact-rated sliding glass doors, among other lines. ViewLux is a frequent choice for Palm Springs slab homes because their frame profiles handle masonry anchoring well and the hardware is built for coastal exposure. We quote brands side by side on paper so you can compare frame construction, glass package, warranty duration, and price before you decide. Estimates are free at (786) 829-6722.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and the surrounding communities with door installation done right since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.