Custom Windows & Doors in Westgate - Free In-Home Measure, Written Price

Fast, Reliable Custom Windows & Doors Across Westgate

Westgate Door Installation and window work runs $2,800-$18,000 depending on opening size, glass spec, and whether we’re re-framing masonry or setting into a prepared rough opening. Most jobs on the 1950s-1970s CBS homes here need county permits pulled through Palm Beach County Building Division, which we handle from the first measurement to final inspection. If you’re staring at an insurance non-renewal letter and original jalousie panels that won’t pass a wind-load check, call (786) 829-6722 and we’ll walk you through what actually has to happen, in what order, and what it costs before anyone touches a saw.

Call (786) 829-6722

We’ve been setting custom windows and doors in Westgate long enough to know the difference between a county inspection portal and a city one, and long enough to know that on acreage off Westgate Avenue or down by the C-51 canal, drainage and access change the scope before the first measurement is even taken. That local knowledge keeps your project moving when insurance deadlines are not.

Why TruePane Windows & Doors Is Westgate’s Preferred Custom Windows & Doors Company

Dale Kessler founded TruePane in 2008 on a rule that still sits on the whiteboard in our shop: if the pane is not true, the job is not done. That rule matters more in Westgate than in a lot of South Florida, because the original window openings on these 1960s concrete block ranches were never framed for modern Impact Windows & Doors in Westgate. You need a crew that measures twice, understands load-bearing headers on CBS walls, and doesn’t flinch when the rough opening is a half-inch out of square. That’s the work we do every week here.

Our Custom Windows & Doors team works with background-checked, uniformed technicians who live in the county and have pulled hundreds of permits through Palm Beach County’s portal. We register both manufacturer warranty layers in writing before the truck leaves the driveway, and we back every install with the Done Right Promise. If something isn’t right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.

Westgate homeowners call us because a live person answers around the clock, not a voicemail tree. They call because when a county inspector’s scheduling portal glitches, we know the workaround. And they call because we’ve spent years in this trade building a reputation that means something on a street where neighbors still talk over the fence about which contractor showed up on time and which one didn’t.

Our Custom Windows & Doors Services in Westgate

Custom Shape Windows

Arched, radius, trapezoid, octagon, eyebrow, full-round. If you can draw it, we can build it. On Westgate’s 1950s and 60s ranches, we often match a gable-end arched window or a mid-century picture window proportion that the original builder never intended to hold impact glass. That means custom templating, structural reinforcement on the CBS surround, and glazing that carries a Florida Product Approval number. A radius-top double-hung for a masonry opening runs $1,400-$4,200 installed, depending on laminate and low-E coatings.

Commercial Storefront Glazing

Westgate’s older storefronts and small offices along Westgate Avenue and Military Trail were built when single-pane aluminum and uninsulated glass were standard. Today’s code requires tempered and often impact-rated storefront systems, especially after storm damage or a failed insurance audit. We replace storefront framing, set ADA-compliant doors, and upgrade glazing to hurricane-rated packages without shutting your business down for a week. Typical storefront replacement runs $4,500-$14,000 depending on lineal footage and whether the existing frame is salvageable.

Curtain Wall Systems

For larger commercial and custom residential builds, we engineer and install curtain wall systems that meet Palm Beach County’s wind-borne debris requirements. On a Westgate lot with open exposure, negative wind pressure is higher than in a dense city block, so we specify stronger mullions and deeper anchor embedment than a downtown storefront would need. Material and labor for curtain wall typically runs $38-$85 per square foot of opening, with engineering stamped by a Florida-licensed professional.

Architectural Grilles & SDLs

Simulated divided lites and architectural grilles are the quiet detail that makes a 1950s ranch look intentional instead of replaced. We build interior and exterior SDLs into impact-rated units, matching the original mullion pattern so the house reads as original. For a Westgate homeowner who grew up with that grid pattern and wants to keep it, a Marvin or Andersen unit with custom SDLs in a standard double-hung runs $900-$1,800 per opening beyond the base window cost. We quote it side by side so you see exactly what the grid adds.

Oversized Glass Panels

Fixed picture windows, sliding glass walls, and view panels 8 feet wide or more are becoming the focal point of acreage remodels off Haverhill Road and down toward the canal. Setting a 600-pound insulated impact lite into a CBS wall requires a crane or a four-man glazing crew, proper header support if you’re widening the opening, and sealant joint details that survive Westgate’s salt-laden air without fogging in three seasons. Oversized fixed panels run $2,200-$7,500 per opening installed, more if the masonry needs structural re-framing.

Trusted Brands We Service in Westgate

We’re an authorized installer for more than a dozen manufacturer lines, and on Westgate jobs we most often quote side by side on paper so you can compare warranties, U-factor, and cost per square foot without a sales fog. If you already own a ViewLux window with a failed seal, our techs carry the seal kits and replacement IGUs to bring it back to spec without replacing the whole frame. We register every warranty layer in writing, so when a seal fails in year six, the claim is already on file.

Common Custom Windows & Doors Problems We See in Westgate Homes

• Insurance non-renewals over original jalousie and single-pane aluminum. Carriers are canceling policies across unincorporated Palm Beach County unless the homeowner documents impact-rated windows or shutters. Original jalousie panels fail every wind-load check, and the replacement opening usually has to be re-framed to accept modern glass.
• Salt-driven seal failure on non-marine-grade aluminum. Westgate sits close enough to the Atlantic that those salt-laden breezes push oxidation into cheap aluminum frames and fog IGUs fast. A budget install might last 8 years here where the same unit would last 15 in central Florida. We order marine-grade finishes and specify edge seals rated for coastal exposure.
• Crooked rough openings on 60-year-old CBS walls. Original masonry openings were laid by hand and they drift. A crew that doesn’t true the opening before setting a custom radius window ends up with a racked frame, a sticking sash, and a gap that leaks during summer storms. We flash every jamb with butyl tape and shim to level before the window ever enters the opening.
• Permit delays from contractors who file through the wrong jurisdiction. Westgate is unincorporated, so everything goes through Palm Beach County Building Division, not the City of West Palm Beach. A contractor who files through the city channel can stall a project for weeks, right when your insurance carrier gave you a 90-day deadline. We file through the county every time.

Pricing for Custom Windows & Doors in Westgate, FL

We Also Serve Cities Near Westgate

Our crews work throughout northern Palm Beach County, including Westgate and the surrounding communities of Riviera Beach, Juno Beach, Lake Park, and North Palm Beach. If you’re on the edge of the unincorporated county boundary or just across the line, call (786) 829-6722 and we’ll tell you straight whether we cover your street and when we can be there.

FAQs - Custom Windows & Doors in Westgate