Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Sliding & Patio Doors in Riviera Beach: What to Know First
We install, repair, and replace CGI sliding and patio doors across Riviera Beach, including the Estuary, Blue Heron, and Singer Island neighborhoods. Most CGI slider repairs take one visit, and a full replacement typically runs three to five business days from measure to final walkthrough. We’re an independent CGI service provider, not a manufacturer-authorized dealer, which means we quote the right fix rather than the fix that protects a franchise relationship. If your CGI door binds, leaks, or won’t lock, call (786) 829-6722 and a live person answers.
This page is written for the homeowner who already knows CGI means hurricane-rated aluminum and wants straight answers about what it costs to keep that door square, sealed, and sliding true in a coastal climate.
Key Takeaways
- CGI sliding doors in Riviera Beach fail most often at the roller assemblies, interlock seals, and lock strike alignment due to salt air and frame settlement.
- Most CGI slider repairs run $185 to $520; full replacements typically range $3,800 to $9,600 depending on model line and opening size.
- We’re the independent shop that registers both manufacturer warranty layers in writing before the truck leaves your driveway.
- Same visit for most roller, lock, and weatherstripping work. Replacement jobs get a written line-item quote and a start date that holds.
If it is not right on paper, it will not be right on the wall. That’s how Dale Kessler runs every CGI job, and it’s why Riviera Beach homeowners who have been burned once call us the second time first.
How CGI Products Fail - and How We Fix Them
CGI builds a serious impact door. But Riviera Beach salt air, storm-driven sand, and shifting coastal fill do things to any aluminum frame over time. Here’s what we actually see in the field, model line by model line.
- CGI Estate Series pocket sliders - roller bearings seized from salt and sand. The Estate line’s heavy panels ride on stainless rollers, but the bearing housings sit in a floor track that collects sand from every open door on a windy day. We pull the panel, clean the track channel, replace the roller assemblies with sealed stainless bearings, and the door glides like it did the month it was installed.
- CGI Panorama multi-slide panels - interlock seal compression loss. The Panorama system uses interlocking vertical stiles that depend on a continuous seal to shed wind-driven rain. After five to seven years of Riviera Beach sun, that seal takes a compression set and stops rebounding. We replace the interlock weatherstripping with the correct OEM durometer and re-shim the panel stack so the seals meet evenly across the full height.
- CGI Tribute Series sliders - strike plate misalignment from frame racking. Coastal homes on fill settle. The Tribute door’s multi-point lock is machined to tight tolerances, and even a 1/8-inch frame shift makes the lock bars drag against the strike. We re-square the panel, re-shim the frame, and reset the strike plate so the lock throws clean without forcing the handle. The door locks right, and it stays locked.
- CGI Estate French sliders - worn bottom track causing panel sag. The Estate French configuration puts a lot of panel weight on two bottom rollers. When those rollers wear, the panel sags and starts scraping the track, which compounds the wear. We replace both roller assemblies as a set, inspect the track for grooving, and if the track is scored past tolerance, we replace the track insert before it chews up the new rollers.
- CGI sliding door screens - torn mesh and bowed frames from constant coastal wind. The screen door on a CGI slider takes a beating from daily salt breeze and afternoon storms. We rebuild screen frames with the correct spline size and offer upgraded no-see-um mesh, which holds up far better in Riviera Beach than the standard fiberglass most builders spec.
Our CGI Sliding & Patio Doors Process
Every CGI job we take follows the same sequence. Nothing gets skipped, and nothing gets added to the bill without a conversation first.
- 1
Call and talk to a person. You call (786) 829-6722. A live person answers, asks what the door is doing, and schedules a window of time that works for you. No voicemail tag, no call center.
- 2
Measure and diagnose on site. Our technician measures the opening twice, checks the panel for square, and identifies exactly what failed. We carry OEM CGI rollers, seals, and locks on the truck for common Estate and Panorama repairs.
- 3
Written quote, side by side. You see the line-item price for the repair, and if replacement makes more sense, we quote CGI alongside comparable Andersen, Pella, or PGT options so you decide with full information.
- 4
The fix, done once. We complete most CGI slider repairs in a single visit. Panel removals are handled carefully, the track is cleaned, and every replacement part is set to manufacturer spec.
- 5
Test and walk through. We cycle the door a dozen times, check the lock throw, test the interlock seal, and watch for any hang or scrape. You watch us test it. Then we clean the track channel and leave the work area the way we found it.
- 6
Paperwork before we leave. The Done Right Promise is written on your invoice. Both manufacturer warranty layers, if applicable, are registered in writing before the truck pulls away. No fine print, no follow-up forms.
What CGI Sliding & Patio Doors Cost in Riviera Beach
Riviera Beach CGI slider work falls into predictable ranges. Here’s what we quote, in real numbers, for the jobs we do most often.
| Job | Typical Cost in Riviera Beach |
|---|---|
| Roller assembly replacement, one panel | $185 - $340 |
| Interlock seal replacement, full height | $220 - $410 |
| Lock strike realignment and re-shim | $160 - $290 |
| Screen door rebuild with upgraded mesh | $140 - $260 |
| Full slider replacement, standard 72×80 opening | $3,800 - $6,400 |
| Multi-slide or panoramic system replacement | $6,900 - $9,600 |
What moves the price: panel count, opening size, whether the track is scored past tolerance, and which model line you have. Estate parts run higher than Tribute parts. A pocket door repair costs more than a standard slider because the panel has to come out of the wall cavity. We give you the price in writing before any work starts, and that number does not change unless we find something structural and we talk to you first. Call (786) 829-6722 for a free estimate on your specific door.
Why Riviera Beach Homeowners Call TruePane Windows & Doors for CGI Work
We have been serving Palm Beach County since 2008, and Riviera Beach specifically for the better part of two decades. Dale Kessler grew up in the Blue Heron neighborhood, spent his teenage weekends watching the drawbridge go up and down by the inlet, and learned the glazing trade at Palm Beach State College from an instructor who told him a bad seal is just a slow leak waiting for the right storm. When we work on a CGI door in Riviera Beach, we’re working on a door we’ll drive past next week.
Every CGI job is backed by our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. We stand behind it. We are also an authorized installer for more than a dozen lines including, PGT, CGI, and ES Windows, so when a replacement is the honest answer, we quote side by side on paper and you pick. Background-checked, uniformed technicians do the work the way they’d work in their own mother’s house. A live person answers the phone 24 hours a day, every day, not a voicemail tree.
FAQs
No, when the repair uses OEM parts and is done to spec. We source CGI rollers, seals, and lock hardware directly through authorized distribution channels as an independent CGI service provider, and we document every replacement part on your invoice so your warranty file stays clean. Call (786) 829-6722 if you want us to check your specific model’s warranty status before we touch anything.
CGI frames and laminated glass typically perform well for 20 to 30 years in coastal Palm Beach County, but rollers, seals, and lock components are wear items that need service every 5 to 8 years in the salt air. The door doesn’t fail. The moving parts wear out, and they’re replaceable. That’s the work we do most often, and it’s far less expensive than replacing the whole panel.
If the frame is square and the glass is intact, repair wins almost every time. New rollers, seals, and a lock realignment bring a tired CGI door back to working condition for a few hundred dollars. Replacement makes sense when the frame is racked, the track is scored past tolerance, or you want to change the configuration, like converting a standard slider to a pocket door. We’ll lay both options out on paper and let you decide with real numbers.
CGI leans on heavier aluminum extrusions and a more industrial build. ViewLux is also a Florida impact-rated line and tends to run slimmer in profile. Both have their place. When a Riviera Beach homeowner asks me which one we’d put in our own house, the answer depends on the opening, the exposure, and the budget. We’re authorized for both lines and quote them side by side.
Only if we open the wall and find something structural that was not visible during the measure, and in that case we stop and call you before spending another dollar. Otherwise, the number on the written quote is the number on the bill. Most CGI slider repairs are completed for the exact quoted amount, in a single visit. Call (786) 829-6722 for a free estimate and we’ll put it in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Riviera Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.