Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Sliding Glass & Patio Doors in Riviera Beach: What to Know First
CGI sliding glass and patio doors in Riviera Beach take a beating from salt air, humidity, and storm season, and most owners call us when the door starts dragging, the lock no longer lines up, or a panel fogs between the glass. We’re an independent CGI service provider – not affiliated with or authorized by CGI – and our standard turnaround in Riviera Beach is three to five business days from your call to a finished repair, with most jobs completed in a single visit. You’ll get an upfront price before we start, a written line-item quote, and a door that operates the way it did when it was new.
This page is for homeowners in Riviera Beach who own CGI sliding glass and patio doors and need straight answers about repair costs, parts, and whether a door can be saved. Call (786) 829-6722 and a live person answers – 24 hours a day, 7 days a week.
How CGI Products Fail - and How We Fix Them
- CGI Estate Series sliding doors – rollers flattening under their own weight. The Estate Series uses a heavy aluminum frame, which is good for impact rating but hard on the nylon rollers. After eight to ten years near the coast, the rollers develop flat spots from salt grit working into the track. The door still slides, but it shudders and catches. We replace the rollers with OEM-spec parts and clean the track channel rather than masking the problem with spray lubricant, which just collects more sand in Riviera Beach.
- CGI Sentinel Series patio doors – interlock misalignment at the meeting stile. When the Sentinel Series gets racked even slightly out of square – usually from a settling slab or a storm-tossed frame – the interlocking stiles stop meeting cleanly. You’ll feel a metal-on-metal scrape or see daylight at the center seam. We square the panel, adjust the keepers, and re-shim the frame so the lock throws clean. Most shops re-tap the lock and leave; we fix the geometry underneath it.
- CGI Estate Series – weep hole blockage causing interior track corrosion. Impact-rated doors drain water through small weep holes in the bottom track. In Riviera Beach, salt spray and fine sand plug those holes within a few years, and water backs up into the track channel, corroding the stainless-steel track from underneath. The door gets harder to move every month, and the corrosion spreads where you can’t see it until the track lifts. We clear the weep path, neutralize the corrosion, and re-seal the affected areas so water drains outward again.
- CGI sliding door lock stile – stripped set screws on the latch mechanism. CGI uses a multi-point lock on most Sentinel and Estate doors, and the latch points are driven by small set screws that work loose over thousands of open-close cycles. When the set screws strip, the latch de-syncs and the door either won’t lock or locks only at one point. We replace the worn hardware with the correct CGI-spec components, not a universal latch kit, so all points engage in sequence again.
- CGI patio door – failed seal and fogged glass. The laminated impact glass in CGI doors is built to hold together under windborne debris, but the insulating seal between the glass lites can still fail after years of Riviera Beach sun exposure. Once the seal lets go, moisture creeps in and you get fog between the panes that no surface cleaning will remove. We replace the insulated glass unit to the original CGI spec – glass thickness, laminate, and tint matched – so the door keeps its impact rating rather than getting downgraded with generic glass.
Our CGI Sliding Glass & Patio Doors Process
- 1
You call (786) 829-6722 and describe the symptom. A live person answers, asks the right questions, and schedules a visit at a time that works for you. No voicemail tree, no callback form.
- 2
We measure and diagnose on site. Our technician measures the opening twice, checks square and plumb, inspects rollers, tracks, locks, and seals, and identifies the root cause – not just the visible symptom. This is where two decades of CGI-specific work in Palm Beach County makes the difference.
- 3
We put the parts decision on paper. Where CGI OEM parts are available and necessary – rollers, lock hardware, keepers, glass units – we use them. Where a quality aftermarket part performs equivalently without touching the impact rating, we’ll tell you the cost difference and let you decide. You see both numbers before we turn a screw.
- 4
We do the repair right the first time. Rollers, track work, lock re-timing, seal replacement, frame re-shimming – done on the first visit in most cases. Uniformed, background-checked technicians who treat your home like their own mother’s.
- 5
We test the door in front of you. Slide it, lock it, check the seal, watch the drainage. You confirm the door operates correctly before we consider the job complete.
- 6
We write up the warranty. Both manufacturer warranty layers are registered in writing, durations stated, before our truck leaves your driveway. If it’s not done right, we make it right under the Done Right Promise – no paperwork fights, no arguing.
What CGI Sliding Glass & Patio Doors Costs in Riviera Beach
CGI sliding glass and patio door repair in Riviera Beach runs from about $185 for a simple roller replacement and track cleaning to $900-$1,400 for a full insulated glass unit replacement on an Estate Series door. A complete multi-point lock set replacement typically lands between $350 and $650 depending on the series and whether the keepers need re-setting. Here’s the breakdown:
- Roller replacement (pair) + track cleaning: $185-$320
- Interlock alignment + keeper adjustment: $220-$380
- Multi-point lock set replacement: $350-$650
- Weep hole clearing + track corrosion repair: $240-$475
- Insulated glass unit replacement (impact-rated, matched to CGI spec): $900-$1,400
What moves the price is the parts source – OEM CGI glass and hardware cost more than aftermarket equivalents – plus the condition of the frame. If the track is corroded through, we’ll tell you honestly and quote a replacement rather than a patch. Every quote is free, written, and fixed before we start. Call (786) 829-6722 for an exact number on your door.
Why Riviera Beach Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving Riviera Beach and the surrounding communities since 2008, founded by second-generation glazier Dale Kessler out of a principle that out-of-true installs and voided warranties were problems worth fixing permanently. Every CGI job we do carries the Done Right Promise and The Keystone Standard – both manufacturer warranty layers registered in writing before our truck leaves your driveway. A live person answers every call, 24/7, backed by a company that sponsors county fairs and church roof funds because it plans to be here in thirty years. And when a CGI door is beyond sensible repair, we quote replacement lines side by side on paper – PGT, CWS, ES Windows, ECO Window Systems – so you see exactly what you’re buying, down to the warranty terms. If the pane is not true, the job is not done.
FAQs
Yes, in most cases. As an independent CGI service provider, we use OEM-spec components and follow manufacturer repair protocols, so your original CGI warranty remains intact where the coverage applies. Always ask for the parts source in writing – we volunteer it on every quote.
Most CGI roller, lock, and alignment repairs are completed in a single visit that takes one to three hours. Glass unit replacements may require a second visit for the glass once it’s cut and cured, but we schedule that before we leave the first appointment. Call (786) 829-6722 and we’ll give you an honest timeline for your specific door.
If the frame is square, the track is sound, and the glass is clear, repair is almost always cheaper – often by $2,000 or more versus a full replacement. If the frame is corroded through or the impact glass is compromised, replacement makes more sense, and we’ll quote CGI-comparable lines from PGT, CWS, ES Windows, or ECO Window Systems side by side. The decision stays on paper so you can see the numbers.
In Riviera Beach, the usual cause is salt and sand building up in the bottom track, combined with worn rollers and clogged weep holes. The sand acts like sandpaper on the roller axles, and the trapped water corrodes the track from underneath. We address all three at once – rollers, weep drainage, and track corrosion – so the door moves easily again instead of slowly worsening. Call (786) 829-6722 for an exact quote – estimates are free.
Yes. Every job carries the Done Right Promise – if it’s not done right, we make it right, with no paperwork fights and no arguing. The manufacturer’s warranty layers get registered in writing before we leave your driveway, with durations stated. That’s the standard on every CGI door we touch in Riviera Beach.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Riviera Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.