CGI Custom & Geometric Windows Nationwide | TruePane Windows & Doors

CGI Custom & Geometric Windows in Riviera Beach: What to Know First

We install, repair, and replace CGI custom and geometric windows throughout Riviera Beach, including arched, radius, trapezoid, and oversized impact openings. Most repair jobs on CGI products are completed in a single visit with the correct hardware and glass on the truck, and honest pricing starts with a written quote before any work begins. If you own a CGI window in Riviera Beach, FL and the shape is anything other than a standard rectangle, this page is for you. Call (786) 829-6722 and a live person answers, day or night.

Call (786) 829-6722

We are an independent CGI service provider. We install and service CGI products, but we are not a CGI dealer and we do not sell on their behalf. What we do is know their lines well enough to diagnose a failing arched window in a Singer Island condo or a fogged trapezoid over a front entry in Riviera Beach before we touch the frame. Dale Kessler runs this company, and he has spent over two decades setting hurricane-impact glass across Palm Beach County, with a habit of checking specs on paper before anything goes on the wall.

Key Takeaways:

• We service every CGI line found in Riviera Beach homes, from older Estate and Sentinel series to current product families.
• Custom shapes fail differently than rectangles, usually at the sash corners and radius points, and we know where to look first.
• We register both manufacturer warranty layers in writing on every job, cutovers and repairs included.
• A live person answers every call, 24/7, at (786) 829-6722.

How CGI Products Fail, and How We Fix Them

CGI builds a strong impact window, but custom and geometric shapes put stress on sealing points and hardware that standard rectangles never see. After years of working with these products in Riviera Beach, we can tell you the failures repeat in patterns. Here is what we see most often:

• Fogging at the crown of arched units. On CGI radius windows, especially the older Estate line, the curved glass pack sits under constant stress near the apex. The sealant there degrades in Riviera Beach heat and salt air faster than on flat lites. We see a fog line starting exactly at the top arc, and the fix is a full glass pack replacement, not a defogging patch that fails again in a season.
• Hardware bind on geometric sashes. CGI trapezoid and triangle operable units from the Sentinel series tend to bind at the lower hinge corner. The geometry loads the hinge differently than a square sash, and years of opening and closing wear the shoe unevenly. We shim, replace the hinge kit, and realign the sash so it seats flush again. A quick landlord fix with a longer screw only makes the bind worse.
• Weep holes clogged on oversized picture units. Large fixed CGI windows with custom dimensions collect condensation in the track, and Riviera Beach’s humidity plus sea salt means the factory weep slots gum up faster than inland. We flush the tracks, clear the weeps, and verify drainage before we call a job done. Skipping this step is how you get water staining on interior sills even when the glass is intact.
• Frame fastener corrosion near the coast. Homes within a mile of the Intracoastal in Riviera Beach, particularly around Blue Heron and Singer Island, show galvanic corrosion on the perimeter fasteners of older CGI frames. The original screws were not poor hardware, but decades of salt mist eat at any dissimilar metal contact. We replace with marine-grade fasteners and re-torque to CGI’s spacing spec.
• Glass delamination on south-facing curved lites. The laminated glass in CGI curved units can begin separating at the edge if the window faces full afternoon sun. We see this on south-facing arched windows in Riviera Beach townhomes built in the 1990s and early 2000s. The fix is glass replacement pulled to the same impact certification, registered under the replacement glazing terms CGI allows.

Our CGI Custom & Geometric Windows Process

We have a set way of working on every CGI job, and we do not skip steps when the homeowner is not looking. Here is what a typical call looks like:

1. 1
   Site visit and measurement. We measure every opening twice, including the radius points on arched units and the diagonal on geometrics. If it is not right on paper, it will not be right on the wall.
2. 2
   Diagnosis and parts identification. We identify the exact CGI line, the glass pack composition, and the hardware series. Then we check what CGI still supplies and what has moved to a quality aftermarket equivalent with the same certification.
3. 3
   Written quote with line items. You get the price on paper before we order anything. No change orders, no added line items at the end. If the aftermarket part makes more sense, we tell you why and show you the difference in writing.
4. 4
   Single-visit work. Most CGI repairs are completed the day we schedule them. The truck carries common CGI hardware kits and glass pack options, so we are not running back and forth to a supply house while your opening sits unglazed.
5. 5
   Testing and cleanup. We cycle the sash, check the drainage, and for impact windows we verify the glass is seated and pinned correctly. The site is clean before we leave.
6. 6
   Warranty registration. We register both manufacturer warranty layers in writing, with durations stated, before the truck leaves your driveway. The Done Right Promise covers our workmanship on every job.

What CGI Custom & Geometric Windows Costs in Riviera Beach

CGI custom and geometric window work is priced by the opening and the specific failure. Here is what we typically see in Riviera Beach and the surrounding coastal areas:

• Glass pack replacement on a fogged arched unit: $400 to $900 depending on the arc length and glass type.
• Hardware overhaul on a geometric sash: $180 to $350 for hinge kits, shoes, and realignment.
• Weep clearing and track service on oversized picture units: $120 to $200 per opening.
• Full frame fastener replacement on a corroded coastal unit: $250 to $600 depending on access and how many fasteners have failed.
• Complete replacement of a non-standard CGI window: $1,800 to $5,000 plus, driven by the shape, size, and whether the opening must match current impact code.

What moves the price is access, the arc length on curved glass, and whether the unit is a true geometric with multiple mitered corners. Riviera Beach homes with second-story openings or units set in stucco take longer and cost more. We quote in writing and the price on the paper is the price you pay. Call (786) 829-6722 for a free estimate on your specific CGI window.

Why Riviera Beach Homeowners Call TruePane Windows & Doors for CGI Work

We are not the cheapest bid in Riviera Beach, and we do not aim to be. We aim to be the last call you make for that arched window over the entry or the trapezoid that has not opened right since the last hurricane season. The Done Right Promise backs every job, and The Keystone Standard means both manufacturer warranty layers are registered in writing before we leave the driveway. Our technicians are background-checked and uniformed, and they work in your home the way they would work in their own mother’s.

We have been serving local communities since 2008 through founder Dale Kessler’s craft heritage. When a CGI part is backordered or a full replacement makes more sense, we can quote side by side from other lines we know well: PGT, CWS, ES Windows, and ECO Window Systems. You see exactly what you are buying, on paper, with no pressure. That is how we have kept customers in Riviera Beach for decades, and how we plan to be here in thirty more years.

FAQs