Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Window Installation for Riviera Beach Homeowners
Window installation in Riviera Beach means choosing glass and frames that hold up to salt air, hurricane season, and the July sun without fogging, binding, or leaking. A properly set window should do its job for twenty years or more. A badly set one will tell you it’s wrong within the first summer. TruePane Windows & Doors has been setting windows in Riviera Beach and the surrounding communities since 2008, and every job is covered by our Done Right Promise. That promise is in writing, not in a handshake. If the pane is not true, the job is not done. Call (786) 829-6722 for a free estimate.
We are a second-generation glazier’s company, founded by Dale Kessler in 2008, but the craft goes back further. Riviera Beach homeowners call us because they want a company that will still answer the phone in ten years. Our technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. You can read more about home services or keep reading to see exactly what a TruePane installation includes.
What Our Window Installation Service Includes
Window installation is not one service. It is a family of window types, each set differently, each failing differently when it is not done right. Here is what we install in Riviera Beach and what matters for each one.
Casement Windows
Casement windows hinge on the side and crank outward, which makes them the tightest-sealing operable window you can put in a coastal home. When fully closed, the sash presses against the weatherstripping on all four sides, so a properly installed casement keeps out wind-driven rain better than a sliding window ever will. In Riviera Beach, where afternoon thunderstorms roll in off the Atlantic, that matters. TruePane sets casements with the crank hardware aligned to the manufacturer’s torque spec, because a casement that opens with resistance in May will be a two-hand job by September.
Awning Windows
Awning windows hinge at the top and open outward from the bottom, which lets you leave them cracked open during a light rain without water coming in. They are common in Riviera Beach bathrooms, kitchens, and anywhere a homeowner wants ventilation up high. The installation detail that matters most is the sill flashing, because an awning window sheds water down and away only if the bottom is pitched and sealed correctly. We flash every awning window with the manufacturer’s specified method and then check it with a water test before we call the job done.
Fixed & Picture Windows
Fixed and picture windows do not open. Their job is light, view, and a clean line, and they are often the largest pieces of glass in a Riviera Beach living room or a second-story wall facing the water. The risk with a fixed window is not the glass itself, it is the frame around it: a large fixed unit expands and contracts more than a small one, and if the rough opening is not square, the glass ends up under uneven stress. We measure twice, shim to the manufacturer’s clearances, and document the reveal so the glass sits true and the frame is not fighting the house.
Single & Double Hung Windows
Single hung windows open from the bottom sash only. Double hung windows open from both the top and bottom, which gives Riviera Beach homeowners cross-ventilation on floors where the air can go stale. The installer’s challenge with hung windows is the balance system: springs or block-and-tackle balances that hold the sash in place. If the window is not set plumb and square, the balances wear unevenly, and the sash creeps down or jams inside a year. We set every hung window to a level and plumb tolerance of an eighth of an inch or less, then cycle the sash a dozen times before we clean up.
Sliding Windows
Sliding windows move horizontally on a track, and they are popular in Riviera Beach because they are simple and wide open to the breeze. The track is the whole game: a slider set on a track that collects sand and salt grit will grind and bind within a few seasons. We install sliding windows with the track pitched for drainage, the rollers adjusted to the manufacturer’s spec, and the weep holes cleared and tested. A slider that glides with one finger on day one should glide the same way on day one thousand.
Bay & Bow Windows
Bay and bow windows project outward from the wall and are built from three or more window units joined in the factory or on site. They add floor space, light, and a shelf, but they also add structural load, and in Riviera Beach they catch wind from every direction. The critical work is the support system underneath: cable or bracket supports, the seat board, and the roof or flashing above. TruePane installs bay and bow windows with the manufacturer’s structural kit, never improvised lumber, and we check the projection for level and the joints for alignment before the finish trim goes on. You can see how this fits with our wider Window Installation in Riviera Beach work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Installation
Andersen windows are common in older Riviera Beach homes that were built or renovated with quality in mind. We install Andersen’s full residential line, and we know their hardware well enough to tell you which series fits your opening style and which one will hold its finish longest within a mile of the Intracoastal. A homeowner who has lived with Andersen for twenty years is usually replacing Andersen with Andersen, and we are set up to do that without changing the look of the house.
Pella and Marvin are the other two lines we quote most often in this area. Pella makes a strong fiberglass and wood line that handles Riviera Beach humidity well, and Marvin’s wood and clad units have the cleanest sightlines for view-facing walls. Whether you have Pella, Marvin, Andersen, or another make entirely, we can quote the replacement side by side with what you have now, on paper, so you see exactly what you are buying before you sign anything.
Signs You Need Window Installation Right Now
- Condensation or fog between the panes. This means the seal has failed and the insulating gas has leaked out. The window cannot be repaired to its original performance; the glass unit must be replaced, and in many frames the whole window should go with it. Riviera Beach humidity makes this failure worse and faster than inland.
- The sash sticks, jams, or falls shut. A window that will not stay open in a sea breeze is a balance or track problem that will not fix itself. Beyond the annoyance, a falling sash is a genuine safety hazard, especially for fingers and for anyone leaning to open or close it. We check the balances, the track, and the square of the frame to tell you whether it is a repair or a full replacement.
- You can feel air moving around a closed window. Run your hand around the frame on a windy day. If air moves, the weatherstripping or the frame seal has failed. That means your air conditioning is leaking into the yard all summer, and salt air is leaking into the wall cavity, where it corrodes fasteners and invites rot.
- The window frame is soft, peeling, or showing water stains. Water stains at the corners or soft wood at the sill mean water has been getting in for a while. In Riviera Beach, where the humidity never really quits, a frame that looks tired is often rotted behind the paint. Installing a new window into a rotten frame is a waste of money, so we inspect and rebuild the opening first.
- You cannot lock the window or the lock no longer aligns. A window that will not lock is a security opening and an air leak at the same time. If the frame has shifted enough that the lock no longer lines up, the window has moved out of true, and the fix is usually a full re-set or replacement, not a new lock plate.
Our Window Installation Process - Step by Step
We do not show up with a truck full of windows and a prayer. Here is the sequence on a TruePane installation in Riviera Beach.
- 1
Measure and quote. A technician comes to the house, measures every opening twice, and checks the condition of the existing frames and sills. We quote manufacturer lines side by side on paper, with prices for each option, so you can compare glass packages, frame materials, and warranties without guessing. The estimate is free and there is no pressure to sign that day.
- 2
Order and schedule. Once you choose your windows, we place the order with the manufacturer and schedule the install. We tell you the expected lead time in writing. Dale Kessler’s rule applies to the schedule as much as the glass: if we say Thursday, we are there Thursday.
- 3
Prep and protect. On install day, our background-checked, uniformed technicians lay drop cloths, mask off the work area, and remove the old windows carefully. We work in your house the way we would work in our own mother’s house, and we leave it clean at the end of every day.
- 4
Set, flash, and seal. Each new window goes in level, plumb, and square, shimmed to the manufacturer’s clearances. We flash the sill, the jambs, and the head per the manufacturer’s written method, then caulk and seal with materials rated for coastal exposure. Every window is cycled, locked, and checked before the trim goes back on.
- 5
Register the warranties and walk you through it. Before the truck leaves the driveway, we register both manufacturer warranty layers in your name, in writing, with the durations stated. We walk you through how each window works, what to watch for, and what to do if anything ever goes wrong. Then we hand you the paperwork and shake your hand.
For bigger projects, this process runs alongside our Window Installation in Juno Beach and Window Installation in Lake Park work, since our crews cover the whole coastal stretch.
How Much Does Window Installation Cost in Riviera Beach?
A typical single window installation in Riviera Beach runs from $450 to $1,200 depending on the window type, size, frame material, and glass package. A standard double hung in a common size usually lands between $500 and $800 installed. Casement and awning windows tend to run toward the upper end of that range because of the hardware. A large bay or bow assembly can run $2,000 to $7,500 or more because of the structural work and the glass area involved.
What affects the price: the condition of the existing frame, whether the opening needs to be rebuilt, the glass package (impact-rated glass costs more for good reason), and the frame material. Vinyl is the most economical. Aluminum and fiberglass sit in the middle. Wood and clad wood cost the most and look the best. The way to avoid overpaying is to get a written quote that separates the window cost from the install labor and the flashing and trim work, so you can see where every dollar goes. Our free estimates are line-item and fixed. The price we quote is the price on the bill, with no surprise change orders. Call (786) 829-6722 for an exact quote for your openings.
Window Installation Near Riviera Beach - Our Service Area
TruePane installs windows throughout Riviera Beach and the neighboring communities, including Juno Beach, Lake Park, North Palm Beach, Palm Beach Shores, West Palm Beach, Westgate, Palm Beach, Palm Beach Gardens, Jupiter, Palm Springs, and Royal Palm Beach. Most installation jobs in Riviera Beach are scheduled within one to two weeks of the quote, depending on the window line and the manufacturer’s lead time. If you are a few miles up the coast, our crews are already working in your area regularly, and the same pricing and promises apply. For more on our service footprint, see our Window Installation in Lake Park page.
Serving Riviera Beach, FL - Our Local Coverage Area
We’re based in the Riviera Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Installation in Riviera Beach
Window installation is the process of measuring, removing, setting, flashing, and sealing a new window into your home’s existing openings. It is not the same as window replacement, which usually means swapping only the sash or glass. A full installation sets the entire new frame into the wall, squared and sealed, so the window performs for its full lifespan.
For a typical Riviera Beach home, installing five to ten windows takes one to two working days on site. A single window often takes two to four hours including removal, setting, flashing, trim, and cleanup. Larger projects, bay and bow assemblies, or openings that need rot repair will extend the schedule, and we tell you the timeline in writing before work starts. Call (786) 829-6722 for an estimate for your specific job.
A single window installation typically costs between $450 and $1,200 in Riviera Beach, with larger or structural units like bays running higher. The exact price depends on window type, size, frame material, glass package, and the condition of the existing opening. Our estimates are free, line-item, and fixed, so you know the full cost before you agree to the work.
Yes. We are an authorized installer for more than a dozen manufacturer lines, including. We quote those lines side by side on paper so you can compare features and price fairly. Whether you are replacing an existing Andersen with a new one or considering a Pella or Marvin for the first time, we can install it to the manufacturer’s spec and register the warranties in writing.
We do not offer fast, scheduled installation, because proper window installation requires measuring, ordering, and scheduled work. But if a window is broken, boarded, or letting water in, a live person answers our phone 24 hours a day, 7 days a week at (786) 829-6722, and we will tell you honestly what can be done now and what should wait. For urgent glass and frame work, we will get you on the schedule as fast as the job allows.
Every TruePane installation is covered by our Done Right Promise: if it is not done right, we make it right, with no paperwork fights and no arguing. On top of that, The Keystone Standard means both manufacturer warranty layers are registered in writing, with the durations stated, before our truck leaves your driveway. You get the manufacturer’s coverage and our workmanship promise in the same paperwork.
Clear the area around each window inside and out: move furniture back about three feet, take down curtains and blinds, and trim back any shrubs that touch the house. Our technicians will cover the floor and the furniture that stays. If you have an alarm sensor on a window, note it before we arrive so we can work around it and remount it cleanly after the install is done.
Schedule Your Window Installation Service in Riviera Beach Today
If your windows are fogged, sticking, leaking, or simply past their years, call (786) 829-6722 for a free estimate. A live person answers 24 hours a day, 7 days a week, and the quote is line-item, fixed, and in writing. Dale Kessler and the TruePane team have been serving Riviera Beach since 2008, and we will be here to stand behind the work long after the truck pulls away.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Riviera Beach since 2008.
Ready to compare window lines on paper? Call (786) 829-6722 for your free, no-obligation estimate.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.