Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Window Replacement in Riviera Beach: What to Know First
PGT window replacement in Riviera Beach typically runs $850 to $2,400 per opening depending on the series, size, and whether you need impact-rated glass reinstalled to code. Most single-window replacements take us one visit, usually four to six hours, and we quote the job on paper before any work starts. We’re an independent PGT service provider, not a factory affiliate, which means we can be straight with you about what actually needs replacing and what doesn’t.
This page is for homeowners in Riviera Beach who own PGT windows, have one that’s failed or underperforming, and want the replacement done correctly the first time. If you’ve got a fogged pane, a sash that won’t stay up, or a frame that’s started to rot at the sill, call us at (786) 829-6722. We’ll walk through what you’re seeing and tell you honestly whether it’s a repair or a replacement.
How PGT Products Fail - and How We Fix Them
PGT builds a solid window, but every product line has its weak points. Here’s what we see most often in homes across Riviera Beach and Singer Island, and exactly what we do about it.
- Fogged glass on PGT WinGuard and SpectraGuard units. The insulating glass seal breaks down over time, and in Riviera Beach’s salt air and humidity, that failure happens faster than it does inland. Once the argon or krypton fill leaks out, you get condensation between the panes that you’ll never wipe clean. The fix is glass replacement, not a whole new window, unless the sash itself is compromised.
- Failed balance springs on PGT 2200 and 7700 single-hung and double-hung windows. These are the workhorses of older Riviera Beach homes, and the coil balances inside the side jambs lose tension after ten to fifteen years of daily use. The sash drops, won’t stay open, or slams shut. We replace the balance assemblies with OEM-spec parts and set the tension so the sash holds at any height without fighting you.
- Warped or swollen sills on PGT aluminum frame windows near the inlet. Homes close to the Blue Heron Bridge get constant salt spray and high humidity. Aluminum frames hold up well, but the sill track collects salt and sand, and once the weep holes clog, water sits against the frame and causes corrosion and seal failure. We clear the weeps, treat the corrosion, and rebuild the sill if the damage hasn’t reached the rough opening.
- Roller and track wear on PGT sliding glass doors from the 1990s and early 2000s. The original nylon rollers flatten over time, and the door grinds or sticks. Many PGT sliders use a specific roller housing that’s still available as an OEM part, and we’d rather replace the rollers and realign the track than tell you to buy a new door. If the track is grooved from years of grinding, we’ll show you the wear and talk through your options honestly.
- Stress cracks on impact glass that didn’t come from an impact. PGT impact-rated glass is laminated and tough, but thermal stress from direct afternoon sun on one side of the pane and cold AC on the other can cause hairline cracks along the edge. We see this on west-facing windows in Riviera Beach all the time. This is a glass-only replacement, and we match the existing impact rating so you stay code-compliant.
Our PGT Window Replacement Process
Here’s how a typical PGT replacement goes when you call TruePane Windows & Doors.
- 1
You call, you get a person. A live person answers at (786) 829-6722, any hour. You describe the problem, and we ask the questions that matter: window style, approximate age, single pane or insulated, impact-rated or not.
- 2
We measure and diagnose on site. A background-checked tech comes out, measures the opening twice, and confirms what’s actually failed. If it’s a glass-only job, we say so. If the frame is done, we tell you that too.
- 3
You get a written quote with real numbers. We put the price on paper before any work starts. No vague allowances, no “we’ll see once we open it up” surprises.
- 4
Parts decision. We use OEM PGT glass and hardware when it’s available and the right call, and quality aftermarket parts when OEM is discontinued or backordered. We’ll tell you which we’re using and why before we order anything.
- 5
Replacement and testing. We set the new unit, flash and seal it correctly for Riviera Beach’s wind and rain exposure, and test the operation. Sash up, sash down, lock engaged, weep holes clear.
- 6
Warranty registration before we leave. We register both manufacturer warranty layers in writing and confirm your Done Right Promise coverage before the truck pulls away.
Dale Kessler grew up in the Blue Heron neighborhood of Riviera Beach, close enough to the inlet that he spent his teenage weekends watching the drawbridge go up and down and learning to be patient. That patience shows up in how we measure, set, and weatherstrip every PGT window we touch. If it is not right on paper, it will not be right on the wall.
What PGT Window Replacement Costs in Riviera Beach
Honest numbers, based on what we’ve billed across Palm Beach County this year.
- Glass-only replacement (insulated, non-impact): $350 to $700 per pane, depending on size and low-E coating
- Glass-only replacement (impact-rated, PGT WinGuard): $600 to $1,200 per pane
- Full-frame window replacement (PGT 2200 or 7700 series): $850 to $1,600 per opening
- Full-frame impact window replacement (WinGuard or SpectraGuard): $1,200 to $2,400 per opening
- Balance spring or hardware replacement on an existing PGT sash: $180 to $400 per window
What moves the price: glass size, impact rating, frame material, whether the rough opening needs repair, and how many windows you’re doing. Multi-window jobs get a better per-opening rate. Call (786) 829-6722 for a free written estimate, and we’ll put exact numbers on paper so you know what you’re spending before you spend it.
Why Riviera Beach Homeowners Call TruePane Windows & Doors for PGT Work
We’ve served Riviera Beach and the surrounding communities since 2008, and we’re still here because we keep our word in writing. Every PGT replacement is covered by our Done Right Promise: if it’s not done right, we make it right, with no paperwork fights and no arguing. The Keystone Standard backs that up. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway.
Our techs are background-checked, uniformed, and trained on PGT’s product lines specifically. They know the difference between a WinGuard and a SpectraGuard, and they know Riviera Beach’s salt air and storm code. We’re an authorized installer for, and CGI as well, so if a PGT replacement isn’t the right call, we can quote side-by-side options on paper and you decide. Live people answer our phones 24/7, and we’ll be there when we say.
Frequently Asked Questions
Yes, if the frame and sash are structurally sound, we can replace just the insulated glass unit in most PGT windows. That includes impact-rated glass on WinGuard and SpectraGuard lines. You only need a full replacement when the frame is rotted, warped, or corroded beyond repair. Call (786) 829-6722 and we’ll tell you which one you’re looking at after a site visit.
Replacing glass or hardware with OEM-spec parts by a qualified installer typically does not void the remaining warranty on other window components. We register both warranty layers in writing so you have documentation. If you’re unsure about your warranty status, call us and we’ll help you sort it out before recommending any work.
Most single-window replacements are done in one visit, usually four to six hours. Impact-rated glass may require an extra day for fabrication. We’ll give you a straight time estimate when we quote the job, and we’ll be there when we say.
Yes. We handle discontinued PGT lines and can source OEM parts for many older series. When OEM parts are no longer available, we use quality aftermarket components and tell you before we order so there are no surprises.
It depends on the condition of your other windows and your budget. If one PGT window has failed and the rest are sound, replacing the single unit makes sense. If you’re seeing the same failure on multiple windows, a multi-window replacement often costs less per opening. We’ll walk you through both paths with real numbers on paper.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Riviera Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After