Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Juno Beach, FL | TruePane Windows & Doors
We provide independent Juno Beach Window Installation and door service across Juno Beach, FL, including repair, hardware replacement, and full-frame impact installations. The thing that sets our CGI work apart here is that we deal with the two forces this barrier island throws at every opening: salt corrosion that eats aluminum frames within a few years, and a turtle-lighting ordinance that changes what glass you can legally put on the ocean side of A1A. If you own a CGI window or door in Juno Beach and it’s binding, fogged, or failed a wind mitigation inspection, call (786) 829-6722 for a straight answer and a free estimate.
Why Juno Beach Residents Choose Us for CGI Service
We’ve been setting and servicing impact-rated windows and doors across Palm Beach County long enough to know which CGI hardware fails first within a block of the ocean and which holds up. Dale Kessler, our owner, grew up in Blue Heron over in Riviera Beach and has spent the better part of two decades measuring, setting, and weatherstripping windows and doors along this coast. He’s particular about getting hurricane-impact specs right the first time, not after the inspector flags something. Our CGI sales & service work in Juno Beach means we show up knowing the local condo associations, the code officers, and the marine environment. We’re an independent service provider, not a manufacturer affiliate. That independence means we recommend the right fix, not the one that protects a factory relationship. A live person answers our phone 24/7 at (786) 829-6722, and every job is covered by our Done Right Promise.
Common CGI Windows & Doors Problems We Solve in Juno Beach
- Salt-air pitting on Sentinel casement frame corners and lock stiles. Oceanfront CGI Sentinel units in Juno Beach often show visible pitting within five to seven years if the original factory finish gets scratched during installation or cleaning. Once pitting starts, the aluminum corrodes under the paint and the lock stile loses its seal surface. We address this with marine-grade hardware swaps or full-frame replacement when the pitting is structural.
- Corroded cam-action locking hardware on Targa sliding doors. The Targa’s cam-action locks are precise, but Juno Beach salt mist gets into the mechanism and seizes the cams. The door won’t lock flush, drafts come through, and the locking rods bind. We replace the hardware with either OEM parts or 316 stainless aftermarket when coastal conditions call for better corrosion resistance.
- Failed glazing seals from thermal cycling and salt mist. Impact laminated glass units on ocean-facing walls expand and contract hard in Juno Beach’s sun, and salt mist works into any micro-gap in the edge seal. Condensation between the panes is the tell. Once the seal is gone, the unit loses some insulating value and the interior film can start to cloud.
- Stripped adjustment screws in heavy-duty hinges. Large CGI fixed/awning combos with heavy sashes put real torque on the hinge screws. After enough open-close cycles, especially with salt dust in the threads, the screws strip and the sash sags. We correct the geometry and install fresh hardware rather than cranking a stripped screw.
- Wind mitigation inspection failures on aging condo units. Juno Beach condos built in the 1970s and 80s frequently still have original single-pane aluminum frames with no impact rating. When an association schedules a wind mitigation inspection, those units fail. We handle the replacement with current CGI impact product and register both warranty layers in writing under our Keystone Standard.
CGI Service in Juno Beach: What Local Conditions Mean for Your Equipment
Juno Beach sits on a narrow Atlantic barrier island with no inland buffer, which means every window and door on the ocean side of A1A gets hammered by salt spray in a way that Palm Beach Gardens, six miles west, never sees. That salt load is why we see CGI Sentinel casement frames pitting within five to seven years of oceanfront installation, where the same unit might last twelve to fifteen years a mile inland. The more specific issue, and one that catches a lot of homeowners off guard, is the turtle-lighting ordinance. From March through October, Juno Beach code officers actively enforce restrictions on any exterior-visible white light from windows and doors facing the beach, because the town hosts one of the most active loggerhead sea turtle nesting beaches in the U.S. If you’re replacing an ocean-facing CGI window, that means glazing with amber-tinted or low-e tinted glass, or pairing it with motorized blackout treatments. Not doing so can get you cited, and the fix after installation is never cheap. Dale’s rule applies here: if it is not right on paper, it will not be right on the wall.
CGI Models & Products We Service in Juno Beach
We service the full CGI residential impact product range you’re likely to find in Juno Beach: the Sentinel Impact Series casements, awnings, and fixed windows that dominate oceanfront condos; the Estate Collection for higher-end single-family homes; the Commercial Impact Series where mixed-use buildings need rated storefront and curtainwall repairs; and the Targa Series sliding glass doors that open onto so many beachside patios. Our parts approach is straightforward: OEM CGI parts first for rollers, multi-point lock sets, and interlocking weatherstripping, because factory fit matters. But where Juno Beach’s salt environment out-performs factory spec, we spec marine-grade 316 stainless aftermarket hardware, particularly for hinges, rollers, and lock components. For units over fifteen years old with pitted frames or compromised seals, we’ll recommend full-frame replacement rather than another repair cycle that buys you two years.
CGI Service Pricing in Juno Beach
CGI service pricing in Juno Beach depends mostly on what’s failing and whether we’re repairing or replacing. Hardware work like cam-action lock swaps, roller replacements, and weatherstripping runs lower on the scale. Glazing seal failures on impact laminated units cost more because the glass unit itself has to be fabricated to spec. Full-frame replacement of a corroded Sentinel casement is the higher end, especially when turtle-safe low-e tint is required. Every estimate we write is free, line-itemed on paper, and shows both the OEM and upgraded hardware options side by side. There’s no surprise on the bill after we start. For an exact number on your CGI window or door, call (786) 829-6722.
Serving Juno Beach, FL - Our Local Coverage Area
We’re based in the Juno Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Juno Beach
Yes. CGI impact windows can be ordered with an amber-tinted or low-e tinted interlayer or glass coating that keeps interior light below the ordinance threshold while still letting in natural daylight. The clarity difference is slight compared to clear glass, and for ocean-facing openings in Juno Beach during the March through October nesting season, it’s the difference between compliance and a code citation. We’ll spec the right tint for each opening before you order. Call (786) 829-6722 to walk through options, and the estimate is free.
They are. The two failure patterns we see repeatedly in Juno Beach are pitting of the aluminum frame corners and lock stiles, and seizing of the operator crank from salt corrosion. Both come from the constant Atlantic salt spray, and both get worse when the factory finish is scratched during installation. If caught early, we can often replace the sash and hardware without pulling the entire frame. Once the frame pits structurally, replacement is the honest fix.
Yes, for virtually all oceanfront and near-ocean Juno Beach condo buildings, impact-rated products are code-required and often association-mandated. Palm Beach County coastal design wind speeds exceed 160 mph, and non-impact units are functionally uninsurable at that exposure. Condo associations in Juno Beach typically require owner-installed windows to match the impact rating of the rest of the building envelope. We’ll confirm your association’s exact requirements before quoting.
We replace the rollers, and we choose the hardware based on what the Juno Beach Door Installation is up against. If factory CGI rollers are available and the door isn’t in a direct salt-spray exposure, we use OEM. If the door is on the ocean side and the old rollers disintegrated from corrosion, we upgrade to marine-grade 316 stainless aftermarket rollers that out-perform the factory spec in Juno Beach conditions. The fix restores smooth travel and lets the lock stile seat flush again. For a quote on your specific door, call (786) 829-6722.
On the ocean side of A1A, expect fifteen to twenty years from a properly installed CGI impact window before the frame begins to show meaningful corrosion or the seal needs attention. Units set back a few blocks may reach twenty-five years. Far inland, the same product would run longer. The ocean exposure in Juno Beach shortens the frame life more than the glass life, which is why we stress annual hardware checks and prompt touch-up of any finish scratches. If your windows are approaching that age and showing signs, call (786) 829-6722 for a free assessment.
Service Areas Near Juno Beach
We service CGI windows and doors throughout the coastal stretch, including Juno Beach service area proper, plus CGI service in Lake Park, CGI service in Riviera Beach, North Palm Beach, Palm Beach Shores, and West Palm Beach. If you’re within a short drive of the Juno Beach Pier, we’ll get to you.
Book Your CGI Service in Juno Beach Today
If your CGI window or door is binding, fogged, pitted, or failing to lock flush, don’t wait for the next storm season to test it. Call (786) 829-6722 to schedule your free estimate. A live person answers, and we’ll work the visit around your schedule.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Juno Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.