Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Westgate
Window installation in Westgate usually means one thing: replacing original jalousie or single-pane aluminum sliders with impact-rated units that pass a Palm Beach County inspection before an insurance deadline hits. A typical whole-house replacement here runs $14,000-$38,000 depending on opening count, frame material, and glass package, and the job generally takes three to seven working days once permits clear. We’ve worked the streets off Belvedere Road and through the older CBS subdivisions long enough to know what the county inspector will flag and what the salt air has already done to the frames. Call (786) 829-6722 for a free estimate, and we’ll measure every opening twice before we quote you a single number.
Why TruePane Windows & Doors Is Westgate’s Preferred Window Installation Company
Westgate is unincorporated Palm Beach County. That one fact changes how permits get pulled, how inspections get scheduled, and how long a job sits waiting. Most contractors working the coast are used to city building departments. We’re used to the county portal, and we’ve built our scheduling around its inspection timeline, not the other way around. That’s saved Westgate homeowners weeks on jobs that were already up against insurance cancellation letters.
Dale Kessler founded TruePane in 2008, but the glazing craft behind it goes back many years in South Florida. Our crews are background-checked and uniformed, and they work in your home the way they’d work in their mother’s. When we finish a window job in Westgate, both manufacturer warranty layers are registered in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s on every job we do. The Done Right Promise backs the workmanship. If it’s not done right, we make it right. No paperwork fights, no arguing.
Westgate homeowners have kept us busy for years, and our reputation here is built on showing up when we say, quoting side by side on paper, and never leaving a fogged seal or a binding sash behind. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. You call, a person picks up.
Our Window Installation Services in Westgate
Casement Windows
Casement windows seal tight against wind-driven rain, which matters in Westgate because Atlantic squalls push water sideways, not down. The original louvered aluminum casements in 1950s and 1960s CBS homes here leaked at the hinges and let conditioned air pour out. A modern impact-rated casement with a marine-grade stainless steel hinge system fixes both problems. Casement installs in Westgate typically run $900-$2,200 per opening, depending on size and glass package.

Awning Windows
Awning windows hinge at the top and open outward, which makes them a smart choice over kitchen sinks and in utility rooms where Westgate’s older masonry walls limit opening width. The catch with awnings near the coast is the hardware. Cheap zinc-plated operators corrode in salt air within a few years. We specify stainless or marine-grade hardware on every awning we install west of I-95. Expect $700-$1,800 per opening in Westgate.

Fixed & Picture Windows
Fixed picture windows are the simplest opening to make air- and water-tight, which is exactly what a block house off Congress Avenue needs. The original fixed aluminum frames in Westgate’s CBS stock had no thermal break, so they sweat in summer and corroded at the corners. We install impact-rated fixed units with low-E glass and argon fill, flashed at every jamb. Picture windows here run $800-$2,500 per opening, with larger custom sizes on the upper end.

Single & Double Hung
Double hung windows are the most common replacement we install in Westgate. They fit the standard masonry openings in the 1950s-1970s block homes, they meet the county’s wind-load code when impact-rated, and they’re easy to clean from inside a house where the windows sit over shrubs or landscaping. Single hung runs $650-$1,500 per opening; double hung runs $850-$2,300. The difference is mostly about which sashes operate and how the balance system is built.

Sliding Windows
Original single-pane aluminum sliders are everywhere in Westgate, and most of them are shot. The rollers bind, the frames corrode, and the seal between the panes fails, leaving a permanent fog you can’t wipe off. We replace them with impact-rated sliders built with marine-grade frames and stainless rollers. Sliding window installs in Westgate run $900-$2,100 per opening. The salt air is the real reason to stop buying the cheap inland spec.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
TruePane is an authorized installer for more than a dozen manufacturer lines, and in Westgate we work most with. Andersen’s coastal-rated 400 Series holds up to salt air better than most; Pella’s impact-rated Designer Series gives Westgate homeowners a strong mix of glass options and frame material; ViewLux is the value play that still meets Florida Building Code when specified correctly. We stock local parts for these lines, so if a sash or a roller gives out years from now, you’re not waiting on a factory order from Minnesota. We quote manufacturer lines side by side on paper so you see exactly what you’re buying.
Common Window Installation Problems We See in Westgate Homes
- Failed jalousie windows blocking insurance renewals. The original louvered glass panels in 1950s-1970s CBS homes leak air and water constantly. Carriers here now cancel or refuse to renew policies unless impact-rated windows or approved shutters are documented, and a fogged, corroded jalousie is an automatic red flag on a four-point inspection.
- Non-marine-grade aluminum frames corroding in 5-7 years. Atlantic salt-laden breezes reach every block in Westgate. Budget aluminum frames without marine coating oxidize at the joints, the sash warps, and the window stops sealing. We’ve pulled frames out of homes on Belvedere Road that were installed less than a decade ago and were already pitting white.
- Improperly flashed replacements failing county wind-load inspections. Palm Beach County inspectors look for flashing tape at every jamb, not just caulk. Windows installed by contractors unfamiliar with the county’s details get torn out and re-done. That’s a full re-installation cost the homeowner shouldn’t have to eat twice.
- Salt spray shortening the life of low-quality hardware. Balancers, rollers, and sash locks made from cheap zinc or uncoated steel seize up in the coastal air. We specify stainless or marine-grade hardware on every install in Westgate, which adds a little to the quote and years to the window.
Pricing for Window Installation in Westgate, FL
A whole-house window replacement in Westgate typically lands between $14,000 and $38,000. Per-opening prices run about $650-$900 for a basic single hung, $850-$2,300 for a double hung, and $900-$2,500 for casements, sliders, and picture windows, depending on the glass package and frame material. The coastal-spec version of any window costs 15-25% more than the inland-spec version. That price gap buys marine-grade frames, stainless hardware, and impact-rated glazing that passes county inspection. The cheap spec fails the inspection or rots out within a decade. Call (786) 829-6722 for a free estimate, and we’ll put fixed pricing in writing before any work starts.
We Also Serve Cities Near Westgate
If you’re just over the line in Riviera Beach, Juno Beach, Lake Park, or North Palm Beach, we install windows there too. The same Keystone Standard and the same Done Right Promise apply. Call (786) 829-6722 and tell us which neighborhood you’re in. We’ll send a crew that knows the permit office that applies to your address.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Westgate
Westgate does not have a city building department. The community is unincorporated, so all window permits are pulled through the Palm Beach County Building Division, not a city office. That changes the inspection scheduling timeline and the portal you track it through. Contractors used to municipal permitting routinely get this wrong, and the delay lands on the homeowner. We handle the county process start to finish on every Westgate job. Call (786) 829-6722 and we’ll check your address against the county’s system before we quote.
Yes, under the current Florida Building Code, impact-rated shutters can satisfy the wind-borne debris requirement even if the windows themselves are not impact-rated. But the shutters don’t fix the air and water leaks, the corrosion, or the failed seals. An insurance inspector will still flag a deteriorated jalousie on a four-point. You might buy a few more years, but you’re not solving the problem. For Westgate homeowners weighing shutters versus replacement, we’ll quote both paths so you see the real cost difference in writing. Call (786) 829-6722.
Westgate sits close enough to the Atlantic that salt-laden air reaches every block, and it’s persistent, not occasional. Uncoated or non-marine-grade aluminum oxidizes at the joints and corners within five to seven years here, versus fifteen or more inland. The corrosion causes sash warping, jamb separation, and seal failure. That’s why we specify marine-grade frames and stainless hardware on coastal installs. The upgrade costs more up front and less within a decade.
Impact-rated glass is a laminated assembly, two layers of glass bonded to a polymer interlayer, designed to stay in the frame when debris hits it during a hurricane. Tempered glass is heat-treated so it breaks into small pieces instead of large shards, but it will not stop wind-borne debris. Palm Beach County code requires impact-rated glazing or approved shutters in Westgate. Tempered alone will not pass. We stock impact-rated units in the common Westgate opening sizes. Call (786) 829-6722 for a quote.
For a standard single-story CBS home in Westgate, a whole-house replacement typically takes three to seven working days once the county permit clears. The permit timeline depends on Palm Beach County’s inspection scheduling, which varies by season and case volume. We pull the permit the day you sign, order the windows immediately, and schedule the county inspection the moment the last opening is flashed. On a 1962 CBS home near Belvedere Road, we finished a full replacement before the homeowner’s cancellation date. Call (786) 829-6722 and tell us your deadline. We’ll tell you honestly whether we can hit it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westgate and surrounding Palm Beach County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After