Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Lake Worth Beach
Door installation in Lake Worth Beach costs between $1,200 and $4,800 for a standard entry door, with impact-rated units and historic-district work running higher. Most jobs take one day once the door is on site. If you live east of Federal Highway, the salt air is working against every hinge and frame on your house, so the hardware you choose matters just as much as the glass. Our crews know the permitting steps for Palm Beach County’s 160+ mph wind-load code and the extra review that historic-district properties face. Call (786) 829-6722 and we’ll walk you through what your specific home needs.
Lake Worth Beach has a housing stock you won’t find ten minutes inland. The bungalows and Mediterranean Revival cottages built between the 1920s and 1940s have rough openings that were never squared to modern tolerances. A box-store door will not drop into these frames. We measure every opening twice, and when the numbers don’t match, we shim and buck-frame until the rough opening is true before the new door ever comes off the truck. That’s the difference between a door that closes with one finger and one that binds every July when the humidity swells the jamb.
Key Takeaways
- Door installation in Lake Worth Beach runs roughly $1,200-$4,800 for standard entry doors; impact-rated, custom-sized, and historic-district jobs go higher.
- If your home falls within the National Register historic district or a local preservation overlay, replacement doors may require a Historic Preservation Board review before the permit is approved.
- East-of-Federal-Highway homes need marine-grade stainless hinges and anodized or vinyl-clad frames; standard hardware corrodes within a few years.
- Palm Beach County’s design wind-load requirement is 160+ mph, which means impact-rated glazing and a permitted installation are not optional if you want your insurance to hold up after a storm.
- TruePane registers both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s included on every Lake Worth Beach job.
Why TruePane Windows & Doors Is Lake Worth Beach’s Preferred Door Installation Company
We’ve been working on Lake Worth Beach homes long enough to know that the house on North Lakeside Drive has different problems than the house on South M Street. The older blocks near the Intracoastal deal with salt corrosion. The historic-district bungalows near Lucerne Avenue deal with preservation review. The 1950s ranch houses west of Dixie Highway deal with undersized jambs and settled slabs. None of this surprises us anymore, and none of it changes how we quote: upfront, on paper, with the permit cost listed as its own line item.
Dale Kessler founded TruePane because he got tired of walking into homes where the last contractor had voided the manufacturer’s warranty with a sloppy install and then disappeared. Our Done Right Promise is the answer to that: if it’s not done right, we make it right, no paperwork fights, no arguing. We’ve been doing this since 2008 as a craft tradition, and we hire local. The technician who measures your door in Lake Worth Beach is background-checked, uniformed, and trained on the same standard we hold our own work to.
Our Door Installation team handles everything from a single front door replacement to full French door and storm door packages. When you call, a live person answers. Not a voicemail tree, not a callback form. That matters when you have a door that won’t latch and a storm is three days out in the Atlantic.
Our Door Installation Services in Lake Worth Beach
Entry & Swing Doors
Impact windows and doors in Lake Worth Beach do two jobs at once: they welcome people in and they hold the weather out. On the older bungalows near the historic district, we typically replace the original wood door with an impact-rated fiberglass or steel unit that carries the 160+ mph wind-load rating Palm Beach County requires. We match the exterior profile as closely as the code allows when preservation review applies. A typical entry door swap runs $1,800-$3,600 depending on glass, hardware, and whether the rough opening needs correction.

Double & French Doors
Double and French doors are common on the Mediterranean Revival cottages throughout Lake Worth Beach, especially on the 1920s and 1930s builds near the National Register district. The rough openings on these homes are frequently out of square by a half-inch or more, which means the door needs shimming, buck framing, and often a custom-sized unit. We quote Andersen, Pella, and Marvin lines side by side on paper so you can see the actual difference before you commit. Budget $3,200-$7,500 for a proper impact-rated double door installation with hardware that will survive the salt air.

Storm Doors
A storm door east of Federal Highway has a hard life. Between the Atlantic salt spray and the afternoon thunderstorms that roll through from June to October, the hardware takes a beating. We install storm doors with marine-grade hinges and anodized frames as standard practice on this side of Lake Worth Beach, not as an upsell. A well-built storm door adds a layer of protection for your primary entry door and gives you cross-ventilation on the days when the breeze off the Intracoastal actually makes it through the house. Expect $900-$2,400 depending on glass and frame material.

Bifold & Folding Doors
Sliding and patio doors in Lake Worth Beach are rare on the historic bungalows but increasingly common on renovated homes along the Intracoastal, where owners want the wall to open up to the water view. These are heavy units, and the floor framing has to be right or the door will sag within a year. We check the header and the subfloor before we quote, because a folding door that binds is a door you’ll hate every time you use it. Folding door projects run $5,000-$12,000 and up depending on width and glazing.

Pivot Doors
Pivot doors are a statement piece, and the statement only works if the pivot hardware is rated for the load. On Lake Worth Beach homes that sit close to the salt air, we specify stainless pivot hinges and weather-sealed thresholds. These doors are heavy, and the rough opening has to be dead level for the pivot to operate smoothly. If you’re considering a pivot door on an older home along Lakeside Drive or South Palmway, plan for structural review first. Pivot door installs run $4,500-$10,000 on average.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Storm and Wind-Load Compliance: What Lake Worth Beach Actually Requires
Palm Beach County’s design wind-load requirement is 160+ mph, and a door installation in Lake Worth Beach has to meet it whether your home is a 1926 bungalow or a 2005 block-and-stucco build. Impact-rated glazing is the standard path to compliance. A legitimate quote will list the specific product with its Miami-Dade or Florida Building Code product approval number, the permit fee as a separate line, and the inspection step after the door is set. A cheap quote that leaves out the permit and the impact-rated glass is not a deal. It’s a door that gives your insurance company a reason to deny a claim if the next hurricane takes the wall with it.
Here’s what a compliant quote from us includes that a bare-bones bid often skips:
- Impact-rated door unit with documented product approval for Florida’s High Velocity Hurricane Zone.
- Permit pulled and inspection scheduled with the city of Lake Worth Beach and Palm Beach County as required.
- Rough opening correction - shimming and buck framing to square before the door is set, not after.
- Marine-grade hardware - stainless hinges, anodized frames, corrosion-resistant weatherstripping on salt-exposed homes.
- Both manufacturer warranty layers registered in writing before the truck leaves the driveway. That’s The Keystone Standard.
- Done Right Promise - if something isn’t right, we fix it, no arguing.
The Historic Preservation Board review is the wild card. If your home sits within the historic district or a preservation overlay near Lucerne Avenue or North Lakeside Drive, replacing a front door that changes the exterior profile or color can add two to four weeks to the project timeline. We’ve been through those reviews. We know what the board looks for, and we prepare the submittal so you don’t get bounced back to the end of the queue. The Lake Worth Beach homes we work on deserve that kind of attention, and we’re set up to deliver it.
What We See in Lake Worth Beach Homes: A Field Note
Our crew recently replaced a pair of original French doors on a 1920s Mediterranean Revival cottage near the National Register historic district. The rough opening was out of square by nearly 3/4 of an inch, so we shimmed and buck-framed for a custom-sized Andersen impact-rated double door with marine-grade stainless hinges and anodized frames. After pulling the permit and passing the HPB review, we installed new flashing tape and a factory-finished low-E insulated glass unit. The homeowner can now close the door with one finger, and it’s rated for Palm Beach County’s 160+ mph design wind load. That’s the job done right, and it’s the standard on every door we hang in this city.
Trusted Brands We Service in Lake Worth Beach
We’re an authorized installer for more than a dozen manufacturer lines, including. We quote these lines side by side on paper so you can see the actual differences in glass package, frame material, and wind-load rating before you spend a dollar. For Lake Worth Beach homeowners east of Federal Highway, we stock marine-grade replacement hinges and hardware locally, which means faster turnaround on repairs when a salt-corroded hinge finally gives out. If your existing door is a good unit with bad hardware, we’ll tell you that first. We’d rather replace the hinge than sell you a door you don’t need.
Common Door Installation Problems We See in Lake Worth Beach Homes
- Salt-corroded hinges and lock hardware: Homes east of Federal Highway sit close enough to the Atlantic and the Intracoastal that standard hinges pit and bind within three to five years. We specify marine-grade stainless or anodized aluminum on every salt-exposed install, because a door that won’t latch is a security problem and a weather problem at the same time.
- Out-of-square rough openings on pre-1960 bungalows: The framing in these homes has settled and shifted for 60 to 100 years. An off-the-shelf door dropped into an unchecked opening leaves hacked frames, uneven reveals, and a door that seals poorly. We measure twice and correct the opening before the door goes in.
- Doors that fail wind-load code after a cheap install: We see doors with no product approval, no permit, and impact glass that isn’t actually impact glass. When a storm comes, the homeowner finds out at claim time. A compliant install with documented product approval is what keeps your insurance company from walking away.
- Historic district doors installed without HPB review: A homeowner swaps a front door on a contributing structure without going through the Historic Preservation Board, and the city flags it on the next permit inspection. That means fines, a stop-work order, or having to redo the work with a compliant door. We pull the permit and go through the review up front so you don’t inherit that mess.
Pricing for Door Installation in Lake Worth Beach, FL
A standard entry door installation in Lake Worth Beach runs $1,800-$3,600 for impact-rated units on most pre-1960 bungalows, including rough opening correction and basic hardware. Entry & Swing Doors on newer block homes with a square opening can start closer to $1,200. Double and French doors run $3,200-$7,500, with custom-sized units on Mediterranean Revival homes at the higher end. Storm doors sit at $900-$2,400. Pivot doors run $4,500-$10,000, and bifold/folding doors start around $5,000 and go up from there.
What changes the price: the product line you choose (Andersen, Pella, Marvin, ViewLux are all quoted side by side), whether the rough opening needs structural correction, whether historic review applies, and whether your home is salt-exposed and needs marine-grade hardware. We give written line-item quotes with fixed pricing. No change orders, no surprises on the bill. Call (786) 829-6722 for a free estimate, and we’ll put the actual numbers on paper for your door. We also stand behind it with the Done Right Promise and both warranty layers registered in writing before we leave.
We Also Serve Cities Near Lake Worth Beach
TruePane serves Lake Worth Beach and the surrounding communities along the Palm Beach County coast, including Riviera Beach, Juno Beach, Lake Park, and North Palm Beach. Our Door Installation in Lake Worth Beach crews cover the full service area, with the same permitting and wind-load expertise applied on every job. A live person answers the phone 24/7, and scheduling is coordinated from our South Florida office.
Serving Lake Worth Beach, FL - Our Local Coverage Area
We’re based in the Lake Worth Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Lake Worth Beach
Yes, if your home sits within the National Register historic district or a local preservation overlay, your replacement door must satisfy both the Historic Preservation Board’s exterior profile and color restrictions and Palm Beach County’s 160+ mph wind-load code. The HPB review can add two to four weeks to the timeline and may limit your material and finish choices. We prepare the submittal and go through the review for you so the door gets approved and the code compliance is documented. Call (786) 829-6722 and we’ll tell you whether your specific address triggers the review.
A compliant quote includes the impact-rated door unit with its Miami-Dade or Florida Building Code product approval number, the permit fee as a separate line item, the scheduled inspection, rough opening correction, and marine-grade hardware where salt exposure applies. A cheap quote omits the permit, uses non-impact glass, or skips the hardware upgrade to hit a lower number. The cost of that shortcut shows up when the door fails or the insurance claim gets denied. We put every line on paper before you commit. Call (786) 829-6722 for a free quote.
Salt spray from the Atlantic and the Intracoastal Waterway saturates the air east of Federal Highway, and it accelerates oxidation on standard steel hinges, lock hardware, and uncoated aluminum frames. Standard hardware fittings fail within three to five years in this zone, while the same parts can last a decade or more west of Federal. We install marine-grade stainless hinges and anodized or vinyl-clad frames on salt-exposed Lake Worth Beach homes as standard practice. Call (786) 829-6722 if your door hardware is pitting or binding, and we’ll quote the fix.
If a hurricane damages your home and your door was installed without a permit, without impact-rated glazing, or without the required product approval, your insurance company can deny the claim or reduce the payout. Documented compliance with Palm Beach County’s 160+ mph wind-load code, a passed inspection, and a registered manufacturer warranty give the insurer no room to argue that the door wasn’t up to code. We pull the permit, pass the inspection, and register both warranty layers in writing. That paper trail is part of The Keystone Standard, included on every job.
Sometimes, but not often. Original 1930s and 1940s wood doors on historic-district homes usually predate current Florida impact and energy code requirements, and a repair that preserves the door often can’t bring it into compliance. The Historic Preservation Board may allow a repair if the door is a contributing feature and the work doesn’t change the exterior profile, but the door still has to meet the wind-load code if it’s part of the building envelope. In most cases, full replacement with a code-compliant, impact-rated door that matches the historic profile is the only path. Call (786) 829-6722 and we’ll assess your specific door and give you a straight answer.
Call TruePane for Door Installation in Lake Worth Beach
When you’re ready to replace a door that’s failed, sagged, corroded, or simply outlived its usefulness, call (786) 829-6722. We’ll send a background-checked, uniformed technician to measure, quote, and walk you through the permitting and wind-load requirements for your specific home. Every quote is free, every line item is in writing, and every job is backed by the Done Right Promise. If the pane is not true, the job is not done. That’s the rule we work by, and it’s why Lake Worth Beach homeowners keep our number on the fridge.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Worth Beach and Palm Beach County with years of glazier craft and community commitment.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After