Double Hung Windows

Double Hung Windows in Riviera Beach, FL | TruePane Windows & Doors

Double hung windows bring a classic, balanced look to Florida homes while offering real hurricane protection when built with impact-rated laminated glass. You get two operable sashes that glide vertically and tilt inward for easy cleaning, all in a profile that suits nearly every architectural style from Singer Island condos to ranch homes off Blue Heron Boulevard. At TruePane Windows & Doors, we install double hung impact windows across Riviera Beach, Palm Beach Shores, and North Palm Beach with the same care we’d put into our own homes. We’re the local team that pulls permits, follows HVHZ installation practice, and shows up on time. Call (786) 829-6722 to talk about your project.

Call (786) 829-6722

Product Overview - Double Hung Windows

Double hung windows are the traditional vertical-glide profile most people picture when they think of a window. Both the top and bottom sashes move independently, which gives you flexible airflow: open the top to let warm air escape, open the bottom to pull cooler air in. In Florida, that ventilation matters more than most people realize until their air conditioning bill arrives in August. The impact-rated version we install in Riviera Beach takes that familiar design and builds it around laminated impact glass, so the window works for you both as ventilation and as a structural shield during storm season. Unlike fixed windows or single hung units, double hung impact windows keep the classic look while meeting the strictest building code requirements in the state.

TruePane Windows & Doors installs double hung windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. You can configure the unit in aluminum or vinyl, choose from four finish colors, and spec the glass package that makes sense for your home’s orientation and exposure. For a sun-blasted west-facing bedroom in Riviera Beach, we might recommend Low-E insulated glass. For a shaded north wall near the marina, clear laminated glass may be the better value. We’ll walk you through the choices without upselling you into options you don’t need. That’s how we’ve earned repeat business and referrals from homeowners and property managers along the Intracoastal.

Every double hung impact window we install is ordered to your measured opening and confirmed against your wind zone requirements. We don’t sell stock sizes and hope they fit. We measure, order, and install windows that are engineered for the specific opening and exposure they’ll live with for decades. Ready to see what that looks like on your home? Call (786) 829-6722.

Technical Specifications

Here’s the spec sheet at a glance. These are the core options we configure for double hung impact windows in Riviera Beach and surrounding coastal communities:

• Frame materials: Aluminum (extruded, thermally stable, ideal for coastal salt exposure) or vinyl (energy-efficient, low-maintenance, smooth interior profile).
• Glass options: Laminated Impact Glass with PVB interlayer, Low-E Insulated Glass, Tinted Glass, or Clear Glass.
• Finish colors: White, Almond, Bronze, Black, or Tan. All finishes are applied for long-term coastal durability.
• Screen options: Half screen or full screen, depending on how you use the window and the look you prefer.
• Operation: Vertical-glide sashes, both operable, with tilt-in function on top and bottom for interior cleaning.
• Design pressure: Matched to your wind zone, up to +/-100. We never over-spec or under-spec.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements.

Because every Riviera Beach home is different, these specs are a starting point, not a one-size-fits-all answer. We’ll match your specific opening dimensions, exposure, and code requirements on your quote.

Hurricane & Compliance Performance

These are the six performance pillars behind every double hung impact window we install in Riviera Beach. If you’re comparing quotes, ask every contractor how their product addresses each one.

Laminated Impact Glass

The heart of the system is laminated impact glass with a PVB (polyvinyl butyral) interlayer. When debris strikes, the glass may crack but the interlayer holds the shards in the frame, which prevents wind and rain from entering your home. You’re left with a damaged window to replace, not a flooded living room. That’s the functional difference between impact-rated and standard glass, and it matters every storm season in Riviera Beach.

Miami-Dade NOA / Florida Product Approval

Each double hung impact configuration carries Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers. These are configuration-specific documents, not blanket certifications, so we verify and provide the exact numbers that apply to your quoted unit. Your permit submittal in Palm Beach County will need them, and we handle that paperwork.

FBC/HVHZ Compliance

Riviera Beach sits in a High-Velocity Hurricane Zone, and our double hung impact windows are engineered to Florida Building Code (FBC) HVHZ requirements. That’s a structural standard, not just a glass standard. The frame, hardware, and anchoring all work as one system to keep the window in the opening under design wind loads.

TAS 201/202/203 Testing Context

HVHZ-rated impact products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. These tests simulate the conditions a window actually experiences during a hurricane, from 2×4 impacts to repeated pressure cycles that fatigue weaker systems.

Design Pressure for Your Wind Zone

We match design pressure to your specific wind zone, up to +/-100, and never higher. If your home doesn’t need +100 DP, you shouldn’t pay for it. If it does, you can’t afford a window that falls short. This is one of the most important calculations in the whole project, and we take it seriously on every Riviera Beach installation.

Energy Performance

Low-E insulated glass options are available for reduced heat gain and improved interior comfort. For south-facing and west-facing openings in Riviera Beach, the difference is noticeable within the first month of operation. We’ll help you decide where Low-E makes sense and where clear or tinted glass gets the job done for less.

Color & Glass Options

Color and glass are where your double hung impact windows become your windows, not just code-compliant openings. The five finish options we offer, White, Almond, Bronze, Black, and Tan, cover the palette of most Riviera Beach architecture. White and Almond dominate the older concrete-block ranches and townhome communities along Military Trail. Bronze and Black read as more contemporary and pair well with the modern coastal builds going up along the Intracoastal. Tan tends to disappear into Mediterranean-style stucco homes with tile roofs, which we see throughout Palm Beach County.

Glass selection follows a simple logic: what problem are you solving? Tinted laminated glass reduces glare and heat buildup in rooms with big western or southern exposure. Low-E insulated glass adds a thermal break for year-round comfort and is the best choice for bedrooms and living areas where constant sun is a factor. Clear laminated impact glass is the value play for shaded or north-facing walls where you want impact protection without paying for solar performance you don’t need. We’ll test the light and sun on your actual wall during the site measurement, then recommend based on what we see.

Installation by TruePane Windows & Doors in Riviera Beach

A hurricane impact window is only as good as its installation. That’s not sales talk; it’s physics. The Miami-Dade NOA and Florida Product Approval ratings apply to the complete installed system, including anchoring, perimeter sealing, and flashing. If the installer skips a step, the rating doesn’t protect you. TruePane Windows & Doors installs double hung impact windows to AAMA 2400/2410 practice, which is the industry standard for window installation, and uses AAMA 812 low-expansion foam perimeter sealant to seal the frame against the rough opening. That keeps water, air, and insects out while allowing the wall assembly to breathe correctly.

Our process starts with a pre-install inspection of the rough opening, existing framing, and surrounding stucco or siding. We check for hidden water damage, termite activity, or structural issues that would undermine the new window. Then we set the frame level, plumb, and square, shim it correctly, and anchor it per the engineered schedule for your wind zone. The perimeter gets sealed with foam, the exterior gets flashed, and the interior trim work gets cleaned up. We run a final water test on the installation and walk the job with you before we call it done.

Riviera Beach presents real installation challenges. Coastal salt air eats at improperly treated flashing. Wind-driven rain finds every unsealed seam. And the Palm Beach County building department expects permit submittals and inspections to match the approved product configuration exactly. We’ve done enough installs in Riviera Beach, Singer Island, and Palm Beach Shores to know what inspectors look for and what the coastal environment demands. That’s why we pull permits on every job and don’t cut corners. If you want a window installed once and right, call (786) 829-6722.

Frequently Asked Questions - Double Hung Windows

Get a Quote - Double Hung Windows in Riviera Beach

If you’re ready to see what double hung impact windows will cost for your Riviera Beach home, we’re ready to measure. TruePane Windows & Doors offers free on-site measurements and line-item quotes with no surprises. Call (786) 829-6722 to schedule your measurement or start your project today.

Written by the team at TruePane Windows & Doors, serving Riviera Beach, FL.