Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Impact Garage Doors: The Riviera Beach Owner’s Guide
We stock and install Therma-Tru-compatible impact garage doors throughout Riviera Beach, with most residential replacements running between $2,400 and $5,800 installed depending on size, panel configuration, and wind-load rating. When a Therma-Tru impact door starts failing, owners in Riviera Beach usually notice it after a storm when they spot a crack in the panel skin, hear the rollers grinding against a bent track, or realize the door no longer seats flush against the weatherstrip. That flush seat matters more than most people think: a quarter-inch gap at the bottom lets wind pressure build inside the garage roof assembly, and that is how a perfectly good truss gets lifted off the wall in a named storm.
We keep common Therma-Tru panel sizes and track components in stock at our Riviera Beach location, and a live person answers our phone 24 hours a day at (786) 829-6722 when you are ready to get a quote on paper. You will not get a voicemail tree, and you will not get a callback from a regional call center.
Which Therma-Tru Models This Applies To
Therma-Tru builds impact doors under a few distinct lines, and the compatibility details matter more here than with most garage door brands. The two lines we see most often in Riviera Beach homes are the Classic-Craft and Fiber-Classic entry-door series, but Therma-Tru also produces garage-specific flush and raised-panel impact doors through their builder distribution channels. The identification plate on these doors is usually riveted to the interior panel near the bottom hinge or pressed into the top rail of the first section, and it carries a manufacturing code that tells you the door’s production date, wind-load rating, and panel thickness. Without that plate, any installer is guessing, and guessing on an impact-rated door in Palm Beach County is how you end up with a panel that passes the eye test and fails the inspector’s.
One gotcha specific to Therma-Tru: their impact-rated doors use a non-standard bottom-bracket spacing on several production years, which means an off-the-shelf universal bracket from another manufacturer will sit cocked and bind the lift cable within a season. We measure every opening twice and match the bracket to the Therma-Tru production code rather than forcing a universal part. For panels and track sections, we order the OEM Therma-Tru component when the production run is still supported, and we carry a small set of quality aftermarket equivalents for older doors where Therma-Tru has discontinued the part entirely. We will tell you on paper which one you are getting and why before you spend a dollar.
Signs Your Therma-Tru Impact Garage Door Is Failing
- Visible cracking or spiderwebbing in the panel skin. Therma-Tru’s composite skins are built to flex and return, but after 10 to 15 years of salt air and direct sun from a Riviera Beach east-facing exposure, the surface resin starts to micro-crack. Once water gets into the foam core, the panel loses impact rating and starts to bow.
- The door binds or stalls halfway up the track. This is usually a bent track or a roller that has worn its bearing sleeve down to the pin. On impact doors the track is often thicker gauge, which means the fix is not as simple as swapping a roller: the track alignment has to be reset to the door’s exact wind-load geometry.
- Daylight visible at the top or sides when the door is closed. The weatherstrip on a Therma-Tru impact door is a structural part of the wind-resistance system, not just a comfort strip. If you can see daylight, wind can get in, and your garage becomes a pressure chamber during the next front coming off the inlet.
- The bottom panel feels spongy or soft when you push on it. That is foam core delamination, and it is the number one reason we replace individual Therma-Tru panels in Riviera Beach. Once the skin separates from the core, the panel has lost its impact rating, and painting over it only hides the problem for a season.
- The manual release binds, or the springs sound like a box of rocks. A binding release mechanism on an impact door is often a warning that the spring assembly has shifted out of tension balance. Do not work on torsion springs yourself; that is a conversation we have honestly with every homeowner, and it is further down this page.
Replacement Cost & What’s Included
In Riviera Beach, a full Therma-Tru-compatible impact garage door replacement generally runs $2,400 to $5,800 installed, and the range is driven by three things: door width and height, whether you need a single or double door, and the wind-load rating your home’s position requires. Homes closer to the Intracoastal and inlet in neighborhoods like Blue Heron and Singer Island fall into higher wind zones, and those doors cost more because the reinforcement is heavier. A single 16×7 impact door with standard reinforcement typically lands around $2,800 to $3,600; a double 16×8 or 18×8 with heavy wind-load rating can push past $5,000.
Every TruePane quote includes the door, the track assembly, new weatherstripping, the labor to remove and dispose of the old door, and a line-item breakdown so you see exactly what you are paying for. If the job changes once we open the opening, you will know before we order a thing, and the price will not change after that unless you add work. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway, and the Done Right Promise covers the workmanship: if it is not done right, we make it right, with no paperwork fights and no arguing.
DIY or Call Us?
You can safely do a few things yourself before calling us: inspect the door with the unplugged opener disengaged and the door fully down, check for cracks in the panel skin, look for daylight at the seals, and write down any manufacturing codes you can find on the interior face. That information helps us quote you accurately over the phone. What you should not do is touch the torsion springs, the lift cables, or the bottom brackets. A torsion spring on a double impact door can be wound with enough stored energy to break bones, and the cable tension on a binding door can let go without warning. We have seen what happens when a homeowner backs out a spring bolt with a screwdriver, and it is not worth the hospital bill or the lost weekend.
If the door is cracked, binding, or not seating flush, call (786) 829-6722 and we will walk through what you are seeing. We measure twice, quote on paper in black and white, and most single-door replacements in Riviera Beach are completed in one visit. Dale Kessler’s rule from the shop wall applies here as much as any window job: if it is not right on paper, it will not be right on the wall.
FAQs
Most Therma-Tru impact doors hold their structural rating for 12 to 18 years in Riviera Beach’s salt air and sun, but the weatherstrip, rollers, and spring assembly typically need service every 5 to 7 years regardless of how the panels look. The foam core and composite skin can outlast the hardware, which is why we inspect the whole system every time we touch a door. Call (786) 829-6722 if your door is over a decade old and you have never had the track and springs checked.
No, a cracked impact panel cannot be repaired to its original wind-load rating, not by us and not by anyone doing honest work. The structural certification lives in the unbroken composite skin and foam core; once that is cracked, the panel is compromised. We can often replace just the damaged bottom panel instead of the whole door, which saves thousands on many Riviera Beach homes. Call (786) 829-6722 and we will tell you over the phone whether a single-panel swap is an option for your door.
A single residential impact door swap in Riviera Beach is usually done in one visit, with the old door removed and the new one hung, balanced, and tested the same day. If the job needs a custom-sized door or a specific discontinued Therma-Tru panel, we will tell you the lead time before you agree to anything. The Done Right Promise covers the work regardless.
We stock common Therma-Tru panel sizes, track sections, weatherstrip, and bottom brackets at our Riviera Beach location, and for odd production years we order the exact OEM part rather than forcing a generic substitute. We are an independent service provider, not a Therma-Tru factory outlet, but we install and service Therma-Tru doors constantly and we have the supply relationships to get what this area’s homes actually need. If your part is not on the shelf, we will tell you exactly when it lands and put that date in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Riviera Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.