Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in Riviera Beach: What to Know First
PGT custom and geometric windows in Riviera Beach are specialty units, arched, radius, trapezoid, and oversized shapes that most PGT dealers won’t touch because they require hand-measured templates and non-standard glass fabrication. We handle these jobs regularly as an independent PGT service provider, typically completing a custom window replacement or rebuild within two to three weeks of measure, depending on glass lead time. Honest price posture: you won’t get a bottom-dollar bid from us, and you wouldn’t want one on a shaped window that has to hold its line in a Category 3 blow.
This page is for homeowners in Riviera Beach who already own PGT windows, or who are planning a PGT custom shape, and need someone who will measure it twice, order it once, and stand behind the install in writing. Call (786) 829-6722 to start with a free estimate.
How PGT Products Fail - and How We Fix Them
PGT makes a solid window. We’ve set hundreds of them across Palm Beach County, and we know where they break first, and why. Most failures on custom and geometric PGT units trace back to one of these five issues.
- Aluminum frame corrosion at the sill on PGT 7700 and 7900 series. Riviera Beach sits close enough to salt air that unsealed weep holes let brackish water sit in the lower track. The aluminum starts to pit, then the corner keys seize, and the sash won’t seat square. We clean and re-seal the weep path, replace the corner hardware, and re-bed the frame with a marine-grade sealant rated for coastal exposure. Most Riviera Beach homes are close enough to the inlet that this is the single most common call we get.
- Deflection in oversized arched windows on PGT WinGuard impact units. A radius window over six feet wide carries a lot of glass weight, and if the original installer skipped the internal mullion reinforcement, the arch starts to sag and bind at the apex. We correct this by re-templating the radius, reinforcing the frame with the proper internal channels, and resetting the sash so the arc is true. PGT’s warranty won’t fix a bad install; that’s a workmanship issue, and we take it on.
- Failed insulating glass seals on PGT SpectraGuard laminated units. When the perimeter seal fails on a shaped piece of glass, you get fogging that curves along the arch, and it never dries out because the desiccant is spent. A quick fix is a new sash insert; the right fix is a full replacement IGU cut to the original shape from a manufacturer-approved fabricator. We do the full replacement, because a fogged radius window on a Riviera Beach afternoon is a job you only want to pay for once.
- Hinge and roller wear on PGT Eze-Breeze casement and awning custom shapes. Shaped casement windows carry their weight unevenly, which accelerates hinge shoulder wear. You’ll hear the pop-pop of a worn hinge leaf, or the crank will slip a tooth. We replace with stainless steel hardware matched to the original offset, then re-shim the sash so it closes on a single plane. If you keep turning the crank past the bind, you’ll strip the operator entirely.
- Blown exterior gaskets on PGT 5500 vinyl geometric windows. A trapezoid or half-round in a west-facing Riviera Beach wall gets hammered by afternoon sun and late-day squalls. The exterior glazing bead shrinks, the gasket pushes out, and water finds its way behind the frame. We pull the bead, re-cut the glazing channel, install a UV-stable EPDM replacement, and reseat the glass. This is a window that leaks slowly for a year before it fails all at once; if the paint is bubbling near the frame, call before the drywall goes soft.
Our PGT Custom & Geometric Windows Process
If it is not right on paper, it will not be right on the wall. That’s the rule Dale Kessler keeps on the whiteboard, and it’s the whole process in one sentence. Here’s what a PGT custom job looks like with us.
- 1
Measure and template. We don’t measure a radius window with a tape measure. We cut a physical template of every curve, every arch, every chamfer. The opening gets measured twice, and we record the deflection at the centerline so the new unit accounts for how the house actually sits, not how the drawing says it should.
- 2
Parts and glass decision. We quote OEM PGT parts and quality aftermarket equivalents side by side on paper. For sealed glass, we use a PGT-approved fabricator. For hardware, we’ll tell you when an OEM hinge is worth the price and when a spec-matched stainless replacement does the same job for less.
- 3
Verification before order. The template gets checked against the rough opening, the reveal, and the existing finish line before anything goes to the fabricator. Ordering a custom shape wrong is a three-week mistake. We’d rather spend an extra twenty minutes at the wall.
- 4
Removal and setting. The old unit comes out in one piece, the opening gets inspected for hidden water damage, and the new unit goes in bedded on a full-perimeter seal that matches the original manufacturer’s installation spec. We don’t foam gaps and call it done.
- 5
Test and register. We run the window through its cycle, check the drainage, check the lock, check the reveal. Then we register both manufacturer warranty layers in writing and hand you the registration before the truck leaves the driveway.
What PGT Custom & Geometric Windows Costs in Riviera Beach
Custom and geometric work prices on the shape, the glass package, and the opening condition. A small radius window with a worn hinge might be a $300 to $450 repair. A full replacement IGU for a fogged SpectraGuard arch typically falls between $700 and $1,400 depending on size and glass spec. A complete replacement of a large WinGuard impact arch with a new frame and laminated glass can run $2,500 to $6,000 or more, and that’s the range where you want a written line-item quote, not a phone estimate.
- Hardware repair on a PGT geometric window: $275-$450
- Insulating glass replacement (arched or shaped IGU): $700-$1,400
- Full custom PGT impact window replacement: $2,500-$6,500+
- Frame re-bed and seal on a large radius unit: $400-$800
What moves the price is glass type, whether the frame is salvageable, and whether the opening has existing water damage. We’ll give you a written number before we start, and that number doesn’t change unless we find something structural the homeowner needs to see. Call (786) 829-6722 for a free estimate on your PGT window.
Why Riviera Beach Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been in this community since 2008. Dale Kessler founded TruePane Windows & Doors in 2008, after years of walking into homes and seeing out-of-true installs and warranty registrations that never got filed. He figured a window company should fix both problems, not just sell another window. That’s what The Keystone Standard is: both manufacturer warranty layers registered in writing, durations stated, on every job.
Every TruePane technician is background-checked, uniformed, and trained to work in your home the way they’d work in their mother’s. Our Done Right Promise means if the work isn’t right, we make it right, no paperwork fights, no arguing. And when a PGT job needs a part that’s weeks out, we can quote equivalent units from CGI, CWS, ES Windows, or ECO Window Systems so you’re never stuck waiting on one supply chain. A live person answers the phone 24 hours a day, every day of the year. If the pane is not true, the job is not done.
FAQ: PGT Custom & Geometric Windows in Riviera Beach
In most cases, replacing the sealed glass unit through an independent provider does not void the frame warranty, but it’s your responsibility to confirm the specifics, and we help with that before we start. We use PGT-approved glass fabricators for replacement IGUs, which keeps the replacement within warranty parameters. The bigger risk to a PGT warranty is a bad install, not a glass replacement. We document the work and register whatever warranty layers apply, in writing, before we leave. Call (786) 829-6722 and we’ll check your specific window’s terms with you.
Yes. We cut a physical template of the existing window and the rough opening, including any deflection, so the new unit matches the curve to the manufacturer’s tolerance. On radius windows, we record the arc at the centerline, not just the ends, because a window that looks right from the street can still bind at the apex. This is the part of the job where a good install and a bad one look identical for the first six months.
If the frame is in good condition, a repair almost always costs less than a full replacement, and we’ll give you both numbers before you have to decide. A hardware repair or a seal re-bed might run a few hundred dollars, while a full custom PGT replacement starts around $2,500. If the frame is corroded, out-of-square, or the glass has failed, replacement usually makes more sense over the long term. Call (786) 829-6722 for a free estimate, and we’ll walk you through both options with pricing on paper.
Most custom PGT jobs are completed two to three weeks after measurement, depending on glass lead time and the complexity of the shape. The on-site install itself is typically a single day for a standard custom window, and we register both warranty layers before we leave. We don’t rush a radius window, because a rushed radius is always out of true by the second year.
Yes, and a significant portion of our PGT work comes from correcting installs other companies got wrong. If your window binds in the summer, leaks at the sill, or the arch has started to sag, call (786) 829-6722 and we’ll assess it. You don’t need to go back to the original installer, and we’ll give you a straight answer on whether it’s a repair, a re-install, or a full replacement.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Riviera Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.